T&D RTR-5W Introductory Manual - page 2
1.
Getting the RTR-5W Ready to Use
1.
Connecting the AC Adapter
* To ensure a proper connection make sure that the plug is completely inserted.
2.
Connecting the LAN Cable
- When fi rst making settings, please connect to a computer that is connected to a
local network (same broadcast domain).
* To ensure a proper connection make sure that the plug is completely inserted.
To connect an RTR-5W logger directly to your computer without using a hub, you must
use a cross LAN cable. (Please purchase a cross LAN cable separately.)
For how to directly connect to a computer or for how to connect to use a Wireless LAN
card, see [Connecting to a Network] in the User's Manual on the CD-ROM.
2. Installing the Software
PC Operating Environment
Microsoft Windows 7 32/64bit English
Microsoft Windows Vista 32bit English
Microsoft Windows XP 32bit(SP2 or above) English
Microsoft Windows 2000 English
Browser Internet Explorer 6.0 or above
- Is Windows
®
operating properly?
If Windows is not operating properly,
RTR-5W for Windows may not be installed
correctly or it may not operate properly.
- Please quit all other applications.
If other programs are open, please close and quit all of them, making sure to quit all
Quick Start programs such as a virus checker. To install
RTR-5W for Windows, it is
necessary to have Administrator rights (Computer Administrator) for the computer in
which you wish to install it.
1.
Open Windows
®
.
2.
Place the accompanying CD-ROM into your CD-ROM drive.
In a few seconds, the "Install Program" window will appear.
* If that window does not automatically open, please open it by double clicking the CD-ROM icon
in "My Computer" on your desktop. Also, if the fi le appears in the CD-ROM folder, click on the
"start.exe" icon.
[Execute]
button
Click
3.
Select Install
RTR-5W for Windows and click the [Execute] button to
start the installation.
4.
Follow the directions to install.For more details about the installation,
see the User's Guide on the CD-ROM.
5.
After installation has been completed,
RTR-5W for Windows
will be
registered in the Window's [Start] Menu.
There are 5 applications within
RTR-5W for Windows.
RTR-5W for Windows
In order to use this system it is necessary to carry out registration for wireless communication
between an RTR-5W base station and RTR-51/52/53/RVR-52A data loggers, make recording
settings, make warning monitoring settings and then gather recorded data.
Network Settings Utility
Make all network settings for RTR-5W.
Temp / Humidity Graph
View temperature and humidity data.
Multi-scale Graph
View voltage, temperature and humidity data.
Event Viewer
View data recorded with the RVR-52A Event Data Recorder.
3.
Network Initialization Settings
NOTE:
- Please note, that upon purchase, all RTR-5W units are set with the same IP address. To make IP
address changes, connect one RTR-5W unit at a time and carry out the changes.
Do not connect more than one unit with the same address to the network at the same time. - This
explanation is about how to connect to a local network and is not about how to connect to the
Internet. If you wish to use by connecting to the Internet, see "Connecting to the Internet" in the
User's Manual on the provided CD-ROM.
1.
In
Network Settings Utility
, click on the "Network Initialization" Tab and
then click on the [Search] button.
*After clicking, the search results will be shown in about 5 seconds.
[Search] button
"Network Initialization"
Tab
* The factory default settings for RTR-5W are as follows:
IP Address: "192.168.1.200", Subnet Mask: "255.255.0.0".
[If no units are detected]
-
Check the connection between the computer and the RTR-5W.
-
Check the hub power switch and the network cable type.
-
In some network environments, it may be necessary to make changes to the IP address and
subnet mask at the computer side in order to carry out a search. To fi nd out more details about
checking and changing a computer's network settings, see "Network Initialization Settings" in
the User's Manual on the provided CD-ROM.
2.
Making Changes to the IP Address and Subnet Mask.
1. From the displayed list, select the RTR-5W to which you wish to make settings
by either double clicking on that address or select and click on the [Change
Settings] button.
*The [Network Settings] window will then appear.
[Change Settings]
button
Computer "IP address"
and "Subnet mask"
2.Enter an IP Address and Subnet Mask that is appropriate for your network.
For example, if your computer IP address is "192.168.1.1", and the subnet mask is
"255.255.255.0", then set the RTR-5W IP address as "192.168.1.10".
*If you are unsure, ask your company network administrator.
Enter the “IP address” and
“Subnet mask”
[Send]
button
3. After entering the above, next, enter the login ID and password.
* The RTR-5W factory default login ID is "wsc-user" and the password is "wsc-passwd". Make
any necessary changes to the login ID and password at "Detailed Network Settings".
4. After checking for entry errors, click the [Send] button. After transmission has
been completed, a message will appear.
Click the [OK] button to complete the settings.
*After settings are completed, the RTR-5W will automatically restart. During the restarting
process, a search cannot be performed, even if you click the [Search] button. It should take about
30 seconds.