T-Eye ADR-3000 User Manual - page 10
10
2. Installing the IR light Module
1.
Connect the “Y” power
cable adapter to both the IR
light module and the
recorder. Then connect the
cigarette lighter plug.
2.
Insert the IR light module
after aligning it with the top
of the mirror holder
3.
Arrange the power cord
neatly alongside of the
windshield and door pillar
trim.
Caution
● Connect power to the unit once the IR light module has been connected.
● Aim the IR light module towards the driver and passenger area.
● If you mounting the unit with fixed-type holder, you need to install the mirror holder for
installing IR light Module.
3. Installing the External Remote button
1.
Insert the external input
cable into the external input
connection port on the
upper part of the Cigarette
Lighter Plug.
2.
After removing the adhesive
tape attached on the
external button, attach the
button to the desired
position.
4. Connecting the power cord
1.
Connect the power cord to
the cable on the right of the
unit. Pull the cable up
towards the upper part of
the unit.
2.
Arrange the power cord
neatly after inserting it in
the chink of the door near
the driver or passenger seat.
3.
Insert the power cord into
the Cigarette Lighter Plug.