T-Eye ADR-3000 User Manual - Installation:
9
Installation:
Caution
Be sure to stop the engine before installing the product.
Install the product in a location where the satellite signals are received.
Before permanently mounting the unit, ensure that the camera views meet your
requirements.
(cf. where interior view camera is not hidden by the mirror inside your car)
Mount the unit carefully.
1. Mounting the Unit
You may install the product using any of the following 2 mounting methods:
Method1. Installation with the mirror mount
1.
Align the mirror mount with
the guide on the rear of the
body.
2.
Attach the mirror mount to
the mirror with the front of
the unit facing forward.
(LED
Display
Window
towards the back as shown)
3.
Fasten the screw on the rear
of the mount after tightly
pressing the body of the
unit in place so that it may
not be easily removed.
*In order not to lose the plastic piece,
attach it to the rear of the body.
Method2. Installation using the fixed-type holder
1.
Remove the fixed plastic
cover of the front of the
unit.
2.
Insert the fixed-type holder
into the guide.
3.
Determine the location to
attach the mount to the
windshield or other surface
area.
4.
Clean the mounting surface
and remove the red film from
tape the mount. Tightly press in
place the mount to the
windshield.
*Use isopropyl alcohol to clean the mounting surface of windshield, and leave it to dry.