TAG MCLAREN AUDIO 60IRV Owner's Manual - page 17
Some high-quality loudspeakers have separate drivers for the
middle frequency range as well as high and low. In such cases,
it may be possible (for details refer to your loudspeaker
instructions) to run separate cables for each frequency range
to tri-wire the loudspeakers.
If you wish to do this, you will need to connect two wires to one
terminal. We recommend that you use stackable BFA plugs for
this purpose. These are available from your retailer.
The arrangements described above, and on previous pages, are
only suggestions and do not cover all the connection possibilities
for amplifiers and loudspeakers.
If you want to expand your audio system, please contact your
retailer who will be happy to discuss your specific requirements.
tri-wiring
other multiple
amplifier
arrangements
32
connecting loudspeakers
running in and warming up
33
TAG McLaren Audio equipment is designed to give optimum
performance for many years.
Just like a high-quality car, the performance of your 60iRv
will improve during the first few hours of operation. The electronic
components will then have reached and settled down to near-
perfect specification.
Every time you switch on your 60iRv, the performance will
improve until the components reach their optimum operating
temperature.
running in
warming up
GRA00046.1-[CA]60iRv 12/03/01 15:20 Page 33