TAIKO AG-1000 User Manual - Ag-1000 User’S Manual
AG-1000 User’s Manual
SMS Alert Gateway
All contents are subjected to change without prior notice
Rev 1.0
Page 20 of 22
Copyright © 2005 Taiko Network Communications Pte Ltd
b service is unavailable
now..
The request is not
accepted if any activated
point of gateway was
found under alarm
condition. Since deleting a
number may affect the
alarming process.
9
hp xx,yy.
a hp:xx is changed to hp:yy
The first hand phone
number found from the
alarm group list was
replaced with new
number.
Replace an existing
hand phone number
with a new number.
(only for
administrative hand
phone users)
b service is unavailable
now..
The request is not
accepted if any activated
point of gateway was
found under alarm
condition. Since changing
a number may affect the
alarming process.
10 add k,l,yy.
a hp:xx is added to group k,
index l
The hand phone number
is added into alarm group
k, index l.
Adding an number
into alarm group k,
index l. (only for
administrative hand
phone users)
b service is unavailable
now..
The request is not
accepted if any activated
point of gateway was
found under alarm
condition. Since adding a
number may affect the
alarming process.
11 reset
Reset the ip and
password setting of
gateway
password and ip are reset
Resest the password and
ip setting of gateway to
default factory value
xxx – point name assigned to particular contact point;
xx – old hand phone number to be replaced;
yy – new hand phone number for replacing;
x – point number, where pt#1~8 mean digital input 1 to 8, and pt#9~10 mean relay output 1 to 2;
k – alarm group number;
l – index of a hand phone among alarm group x.
Sms requests from 7 to 11 are allowed for administrative hand phone users only. If the SMS format
is incorrect, then SMS alert gateway replies to sender in such format: Undefined Request. For any
requesting hand phone number out of pre-configured list, no reply will be generated from gateway. All
the commands in SMS requests are case-insensitive, but point name is case-sensitive to its actual name
given during configuration.