Tait TP9400 Series P25 User Manual - Low Battery Warning

148  Charging and caring for batteries

Removing the radio from the charger to make or 

receive a call ends the charging process. Charging 

safely recommences when the radio is reinserted into 

the charger.

If a radio was turned on while being charged, the 

battery indicator may not be accurate when the radio 

is initially removed from the charger. After a few 

seconds, the battery indicator is updated to display 

the amount of charge available in the battery.

Low battery warning

Notice 

Do not allow a radio battery to fully discharge 

every time you use it, or you will shorten the service 

life of the battery.

When the battery is low, your radio warns you in the 

following ways:

■

The battery icon  on the radio display looks 

empty.

■

The status LED on the radio slowly flashes red.

■

A high-pitched beep sounds.

You should recharge or replace the battery as soon as 

possible. When the battery is completely empty, the 

message 

Battery is flat

 appears on the display. The 

radio emits a long, low-pitched beep and then stops 

working. Turn off the radio immediately.