Tait TP9400 Series P25 User Manual - Receiving A Two-Tone Call

70  Operating in conventional mode

Receiving a two-tone call

This feature is available for analog channels only. 

Two-tone signaling is used to call either individual or 

groups of radios. When your radio receives a two-tone 

call that it can decode, it beeps, indicating which type 

of two-tone call has been received.

■

One long beep: a two-tone individual call has 

been received.

■

Two medium beeps: a two-tone group call has 

been received.

■

Three short beeps: a two-tone super group call 

has been received. A super-group call is 

addressed to all radios in the fleet.

Press the PTT key and begin speaking.

Overriding two-tone signaling

You can override two-tone signaling using a function 

key, if your radio is programmed in this way.

■

Press the function key to override two-tone signal-

ing on a channel, and hear all two-tone calls.

The message 

Ignore two-tone activated

(or 

deactivated

) appears on the display.