Taiwan Electrical & Electronic Manufacturers N930R User Manual - page 14

•

Using the Intel(R) PRO/Wireless 802.11a/b/g Network Connection adapter equipment on 

board airplanes, or

•

Using the Intel(R) PRO/Wireless 802.11a/b/g Network Connection adapter equipment in 

any other environment where the risk of interference with other devices or services is per

ceived or identified as being harmful

If you are uncertain of the policy that applies to the use of wireless devices in a specific 

organization or environment (an airport, for example), you are encouraged to ask for 

authorization to use the Intel(R) PRO/Wireless 802.11a/b/g Network Connection adapter

wireless device before you turn it on.

Regulatory information

Information To Be Supplied to the End User by the OEM or Integrator

The following regulatory and safety notices must be published in ocumentation supplied to

the end user of the product or system incorporating an Intel(R) PRO/Wireless 802.11a/b/g

Network Connection in compliance with local regulations.

The Intel(R) PRO/Wireless 802.11a/b/g Network Connection adapter wireless network device

must be installed and used in strict accordance with the manufacturer's instructions as descri-

bed in the user documentation that comes with the product. For country-specific approvals,

see Radio approvals. Intel Corporation is not responsible for any radio or television interfe-

rence caused by unauthorized modification of the devices included with the Intel(R) PRO/

Wireless 802.11a/b/g Network Connection adapter kit, or the substitution or attachment of

connecting cables and equipment other than that specified by Intel Corporation. The correc-

tion of interference caused by such unauthorized modification, substitution or attachment is

the responsibility of the user. Intel Corporation and its authorized resellers or distributors are

not liable for any damage or violation of government regulations that may arise from the user

failing to comply with these guidelines.

Local Restriction of 802.11a, 802.11g and 802.11b Radio Usage

The following statement on local restrictions must be published as part of the compliance

documentation for all 802.11a, 802.11g and 802.11b products.

Caution:

Due to the fact that the frequencies used by 802.11a, 802.11g and 802.11b wireless

LAN devices may not yet be harmonized in all countries, 802.11a, 802.11g and 802.11b 

products are designed for use only in specific countries, and are not allowed to be operated in

countries other than those of designated use. As a user of these products, you are responsible

for ensuring that the products are used only in the countries for which they were intended

and for verifying that they are configured with the correct selection of frequency and channel

for the country of use. Any deviation from permissible settings and restrictions in the country

of use could be an infringement of national law and may be punished as such.

Eng

lish

MANUAL INGLES OK  20/7/06  11:39  Página 13