- DL manuals
- Talkswitch
- Telephone
- TS-850i
- User Manual
Talkswitch TS-850i User Manual
Summary of TS-850i
Page 1
A n s w e r s w i t h i n t e l l i g e n c e ® t a l k s w i t c h s t a r t g u i d e talkswitch ts-850i telephone c t.T p 0 0 5 . 0 1 0 9 0 2 1545 carling avenue, suite 510 ottawa, ontario, canada k1z 8p9 www.Talkswitch.Com ts-850i start guide cover_f-b_print:. 1/22/2009 1:55 pm page 1.
Page 2: Introduction
E v e r y c a l l c o u n t s 1 introduction congratulations on your purchase of the ts-850i cordless dect phone! This guide describes how to install and configure your ts-850i with a talkswitch system. For more information, see the support section at http://global.Talkswitch.Com . Installing the ba...
Page 3
2 t s - 8 5 0 i s t a r t g u i d e 3. Optionally connect the telephone cable from the line port on the base to the telephone wall socket. This will allow you to use the ts-850i as a regular phone as well. 4. Connect the power adapter from the power outlet to the power supply connector. Base phone s...
Page 4
E v e r y c a l l c o u n t s 3 installing the handset charger 1. Place the handset charger within the signal range of the base. The handset has an indoor signal range of up to 150 feet (50 meters) from the base. Concrete and metal objects might affect the signal range. 2. Connect the power adapter ...
Page 5: Installing The Batteries
4 t s - 8 5 0 i s t a r t g u i d e installing the batteries 1. Push in and down on the two holes in the back of the handset to release the battery cover. 2. Insert the batteries into the handset, making sure that their plus and minus ends are facing as shown in the illustration. 3. Slide the batter...
Page 6: Charging The Batteries
E v e r y c a l l c o u n t s 5 charging the batteries 1. Place the handset in the handset charger. The handset turns on, and the battery charge indicator in the display starts to flash. 2. Charge the batteries for at least 10 hours before first use..
Page 7: Reset
6 t s - 8 5 0 i s t a r t g u i d e registering handsets with the base 1. Press the reset button on the back of the base. A five-minute registration period starts, which allows handsets to register with the base. Note: if you have multiple bases, only reset one base at a time, and wait five minutes ...
Page 8: Configure Sip Domain
E v e r y c a l l c o u n t s 7 3. Place the handset in the handset charger. The handset automatically registers with the base, and the configure sip domain message appears on the display. This message indicates that you must configure the ts-850i as an ip extension, as described later. Once the han...
Page 9: Http://global.Talkswitch.Com
8 t s - 8 5 0 i s t a r t g u i d e configuring the ts-850i as an ip extension you can configure the phone as an ip extension located within the office, or outside the office (i.E. An external ip extension). Before configuring a phone, ensure that no handsets registered with the associated base are ...
Page 10
E v e r y c a l l c o u n t s 9 activate extension area 1. Ensure the activate extension check box is selected. 2. Set the extension type to ip extension . 3. Enter the user’s first name and last name . The names are used for caller id, and appear within other pages of the talkswitch management soft...
Page 11: 1 0
1 0 t s - 8 5 0 i s t a r t g u i d e ip extension details area 1. Set the location to internal . 2. Select the phone mac address of the base associated with the handset. The mac address is a 12-digit alphanumeric string located on the box and under the base. A) click mac assignment . The mac assign...
Page 12: 1 1
E v e r y c a l l c o u n t s 1 1 4. See local extensions/fax in help within the talkswitch management software, for instructions on configuring direct line access, hunt group permissions, caller id settings (voip only), call handling and voicemail. 5. After configuring the extensions, choose file >...
Page 13: 1 2
1 2 t s - 8 5 0 i s t a r t g u i d e checking the firewall run the firewall test to ensure the appropriate ports are forwarded from the router at the talkswitch location to the talkswitch unit acting as proxy. There should be no need to make any adjustments to the firewall at the remote location. F...
Page 14: 1 3
E v e r y c a l l c o u n t s 1 3 activate extension area 1. Ensure the activate extension check box is selected. 2. Set the extension type to ip extension . 3. Enter the user’s first name and last name . The names are used for caller id, and appear within other pages of the talkswitch management so...
Page 15: 1 4
1 4 t s - 8 5 0 i s t a r t g u i d e ip extension details area 1. Set the location to external . 2. Select the time zone of the phone. 3. Enter the phone mac address of the base associated with the handset. The mac address is a 12-digit alphanumeric string located on the box and under the base. Not...
Page 16: 1 5
E v e r y c a l l c o u n t s 1 5 configuring the external ip extension handset 1. In idle mode, press the ok key on the handset to access the main menu. The ok key is the round key between the navigation keys. 2. Choose settings , and then press the ok key. 3. Choose network settings , and then pre...
Page 17: 1 6
1 6 t s - 8 5 0 i s t a r t g u i d e using the ts-850i with a traditional phone line note: if you connected the telephone cable from the line port on the base to the telephone wall socket, you can use the ts-850i with a traditional phone line. When connected to the traditional telephone network (ps...