Tapworks AD11 User And Installation Manual - User Information
Programming the AD11 & AD15 Faceplates
Please Remember – Only use tablet or pellet salt in your softener!
25
User information
(cont)
POWER CUTS
If the electrical power to the water softener is interrupted, the time
display will be blank,but the ‘memory’ built into the electronics will
keep the correct time for up to 48 hours.
The water softener will not recharge but will pass softened water. In the
case of a power cut your demand for water will be less as most
appliances will not work and so a recharge should not be necessary.
When electrical power is returned, one of two things will happen:
1 Power off up to 48 hours
The display returns and is steady. No operation is necessary.
2 Power off over 48 hours
The display returns and flashes. Only the time requires re-setting.
The hardness and recharge time will not have been lost as they are
stored. Even if the time is incorrect, the water softener will continue to
work but will recharge at what it believes the time to be. Re-set the time
as described in the programming section (see page 22).
Should an error code appear…
Check electrical connections are as per configuration on page 9.
a Unplug transformer.
b Check direct connections.
c Replug transformer.
d Wait for 6 minutes.If the error code is rectified,the error code
will not re-appear.
NOTE: The softener may recharge immediately following a cleared
error code.
BUILDING A HISTORY
Because it has no historical data to base its logic on, your water
softener will recharge quite frequently when first used to ensure
continuous softened water. Within a few months it will settle into a more
regular pattern.
SALT USAGE
Because your Automatic Demand water softener uses proportional
brining, more frequent recharges are not at the expense of high salt
usage. However, if you are a household with low water usage you will
find after a few months that your water softener will become
increasingly efficient, as it adapts to suit your water usage.
LARGE INFLUXES OF GUESTS
If you have people to stay and use more water than normal, you will
find that your Automatic Demand water softener recharges more
frequently. As your household water usage returns to normal, so too will
the recharge frequency.
ERRO1