Targus PAEPR090U User Manual - Connecting A Usb Device
10
Targus Mobile Port Station
2 Select Start, Settings, and then Printers.
3 Right-click the printer device you are reassigning and
select Properties.
4 In the Printer Properties window, select Details or
Connection for the Printer. (Section titles vary, so
check your printer’s user manual for specific
instructions.)
5 Change the setting to either LPT2, USB001 or USB
Printing Support to redirect printing to the Mobile Port
Station.
Connecting to a Local Area Network
To connect an RJ-45 ethernet cable, attach the cable
connector to the Ethernet port on the Mobile Port Station.
Additional procedures to connect to an actual network
depend on the type of network you are using. Contact your
network administrator for detailed instructions.
Connecting a USB Device
To connect a USB device, plug it into a USB port on the
Mobile Port Station and follow the additional instructions
provided with the device.
For USB devices that use a Y-cable (mostly found on high-
powered devices), it is recommended the type A end of the
connector on the Y-cable be connected first, without the
USB device attached. Once both A connectors are
plugged in, you may then connect the type B connector end
to the USB device.