Targus PAEPR090U User Manual - Device
11
Targus Mobile Port Station
Connecting and Configuring an Audio
Device
1 Plug your Audio Device into the Audio jack on the Port
Station.
2 To enable your headphones, you must first choose USB
Audio in the Properties Settings.
a For Windows
®
2000, click Start, Settings, Control
Panel, and then open the Sounds and Multimedia
folder. Select the Audio tab. Under Sound Playback,
change Preferred Device to USB Audio from the drop
down list.
• Click Apply, then click OK.
b For Windows
®
XP, go to the Control Panel and
choose the Sound and Audio folder. Select the Audio
tab. Under Sound Playback, change Preferred
Device to USB Audio from the drop down list.
• Click Apply, then click OK.
3 Make sure the volume is not set to MUTE.
NOTE: Audio devices will not work simultaneously on
the port station and the host computer.
CAUTION: All audio or multimedia applications must be
terminated before switching between the port station
audio output and the host computer audio output.