Tascam CD-RW900SL Owner's Manual - Important Safety Precautions
IMPORTANT SAFETY PRECAUTIONS
1
TASCAM CD-RW900SL
1
TASCAM CD-RW900SL
The CD-RW900SL can be used to play back CDs (includ-
ing CD-R and CD-RW discs that have been recorded and
finalized on other types of recorder), as well as CD-R discs
and CD-RW discs that have been recorded on the unit.
Audio files in MP3 format on CD-ROM, CD-R and
CD-RW are also playable on the unit.
Track selection
Skipping track numbers backward or forward.
1. SelectdesiredtracksforplaybackwiththeMULTI
JOGdialonthefrontpanel.Turningclockwise
skipsthetracknumberbackwardandcounter-
clockwiseskipsforward.
Or,presstheSKIPkeyontheremotecontrol.
Pressingkeyskipsthetracknumberback-
wardand¯ keyskipsforward.
2. PressthePLAYkeytostartplayback.
Or,presstheREADYkeytocuethetrackandenter
playbackstandbymodeaftermovingtothehead
oftheselectedtrack.Tostartplayback,pressthe
PLAYkey.
Using the skip function
Simple playback operations
WARNING
If you are monitoring using headphones, first adjust
the level control to low on the unit, then connect
to the PHONES jack before playing back. This will
prevent any possible damage to your hearing.
NOTE
The explanation in this manual will assume the user is
starting from the normal Continuous mode.
1. Pressthe
POWER
switchtoturnontheunit.
2. Insertadiscintotheunitwiththelabelsideup.
Thedisplayshows
Disc Loading
.Then
TOC
Reading
willappearwiththeperiodflashing.
When the TOC has been read, the display shows the
number of tracks and total running time of the disc.
Disctype
Totalrunningtime
Totalnumberoftracks
The CD-RW900SL also shows one of the following:
TOC
A disc finalized
MP3
A disc contains MP3 files
3. Pressthe
PLAY
keytostartplayback.
Adjusttheconnectedmonitorsystem,orthelevel
controlforthe
PHONES
ontheunittosetthelisten-
inglevelyoudesire.
NOTE
If a disc has scratch or grime, it could cause the laser
pickup to “skip.” In this case, set the READ SPEED
sub-menu in the PLAY menu option to “High“ (see
“Operation basics” on page 15). This may resolve the
problem, however, the unit’s running sound may
become louder.
4. Tostopplayback,pressthe
STOP
key.
Totemporarilystopplaybackandenterplayback
standbymode,pressthe
READY
key.Toresume
playback,pressthe
PLAY
keyagain.
NOTE
To confirm the total playing time, use the PLAY TIME
option in the SYSTEM sub-menu (see “Operation
basics” on page 15)
Discs for playback
The CD discs in the CD-RW900SL can play back the types
of discs listed below.
Commercial pre-recorded CDs recorded in CD-DA
format.
CD-R and CD-RW discs that have been recorded in
CD-DA format and finalized properly.
•
•
MP3 files recorded in ISO9660 level 1 and level 2
format on CD-R and CD-RW discs, and properly final-
ized. MP3 files that are recorded to a disc with Joliet
format extensions are also playable.
•