Tascam CD-RW900SL Owner's Manual - Important Safety Precautions
IMPORTANT SAFETY PRECAUTIONS
1
TASCAM CD-RW900SL
4 − Playback operations
1
TASCAM CD-RW900SL
Playback modes
There are four different playback modes. The selected
mode will be indicated on the left of the display.
Continuous playback mode (default setting): no indica-
tion lamp
Single playback mode:
SINGLE
is lit
Program playback mode:
PROGRAM
red lamp is lit
Random playback mode:
RANDOM
red lamp is lit
The playback mode can be selected using the
PLAY MODE
key on the remote control unit. Pressing the key changes
the playback mode on the display in the following order:
Continue®Single®Program®Random
You can also select the playback mode using the PLAY
MODE option in the PLAY sub-menu (see “Operation
basics” on page 15). Turning the
MULTI JOG
dial clock-
•
•
•
•
wise changes the playback mode shown on the display in
the following order:
Mode>Cont®Mode>Single®Mode>Program®Mode>Random
Pressing the
MENU
key or pushing the
MULTI JOG
dial
returns to normal mode from the menu mode.
While the mode can be changed from any playback mode,
the explanation in this manual will assume the user is
starting from the Continuous mode.
NOTE
The selected playback mode remains after power is
turned off. However, the program playback mode will
be cleared to “Continuous” mode when the power is
turned off.
Continuous playback
Programing is cancelled, and playback continues in the
normal order.
1. Whenstopped,setthemodetodisplay
Continue
or
Mode>Cont
.
2. Pressthe
PLAY
keytobeginplaybackinorderof
thetracknumber.
Random playback
In this mode, the unit will play back all the tracks on the
disc in completely random order, regardless of track number.
When stopped, set the mode to display
Program
or
Mode>Random
. Press the
PLAY
key and random playback
will begin.
NOTE
Even when the power is turned off, the unit will
remain in Random mode.
Program playback
This function enables playback of selected tracks in
any desired order. Up to 99 tracks can be selected for
program playback.
1. Whenstopped,setthemodetodisplay
Program
or
Mode>Program
.
2. Usethenumberkeys(0~9)ontheremotecontrol
unittoselecteachdesiredtrackforprogramplay-
back,thenpressthe
ENTER
key.
Youcanalsorotatethe
MULTI JOG
dialtoselectthe
tracknumberandpushtoenter.
Thetracknumberwillbeenteredintotheprogram.
Repeat the above step 2 until the desired program is complet-
ed. As the program is being created, the program number and
total program playing time is revised on the display.
NOTE
If the CLEAR key is pressed, the programmed track
will be deleted from the last.
3. Whenprogramsettingiscompleted,pressthe
PLAY
keytobeginplaybackofthetracksinthe
programmedorder.
NOTE
If the STOP key is pressed without first pressing the
PLAY key, all the program data will be erased.
Single-track playback
This function enables playback of just a single track.
1. Whenstopped,setthemodetodisplaySingleor
Mode>Single
.
2. Usethe
SKIP
keyorthenumberkeys(0~9)onthe
remotecontroltoselectthedesiredtrack.The
MULTI JOG
dialcanbeusedtoselectthetrackalso.
3. Pressthe
PLAY
keytobeginplayback.
Aftertheselectedtrackfinishes,playbackstops.