Tascam CD-RW900SL Owner's Manual - 4 − Playback Operations
IMPORTANT SAFETY INSTRUCTIONS
TASCAM CD-RW900SL
1
4 − Playback operations
TASCAM CD-RW900SL
1
Time display switching
When the TIME key on the front panel or the remote
control is pressed, the time display will switch through
several modes on the display.
Elapsed track time (no display light indication)
Remaining track time (
REMAIN
is lit in the display)
Elapsed disc time (
TOTAL
is lit in the display)
Remaining disc time (
TOTAL
and
REMAIN
are lit in the
display)
When stopped, the total recording time is shown, regard-
less of the status of the
TOTAL
and
REMAIN
indicators.
•
•
•
•
NOTE
In program mode, pressing the TIME key displays the
elapsed and the remaining time of the whole program.
When playing an MP3 disc, elapsed track time is
always displayed, and the TIME key cannot be used.
For details on time display during recording, please
refer to “Time display while recording” on page 24.
Even when power is turned off, the time display mode
setting is retained.
Timer playback
By using an external timer, you can set the CD-RW900SL
to play the loaded disc automatically when the unit is
turned on by the timer.
1. First,plugthepowercordoftheCD-RW900SLinto
thepoweroutletofthetimer.
2. Loadadiscintotheunit.
3. Switchthe
TIMER
switchonPLAYtoenabletimer
functiononforthedesireddeck.
WhenTimerplaybackhasbeenturnedon,the
timericonlightsupinthedisplay.
NOTE
The indicator flashes when a disc is not loaded into
the unit.
4. Setthetimertothedesiredtime.Consultthetimer’
soperationmanualfordetails.Atthesettime,the
powertotheCD-RW900SLwillbeturnedon,and
playbackwillautomaticallybegin.
Timerindicator
When stopped, if the playback mode is switched to
another, all the program data will be erased.
The programmed play order is not memorized when
power is turned off.
In this mode, if there are no tracks programed, the
CD-RW900SL will not start playback.
If an attempt is made to enter more than 100 program
steps, the message PGM Full! appears on the display.
If the total program playing time exceeds 999 min 59
sec, --- : -- appears on the display.
Repeat playback
1. Pressthe
REPEAT
keytoturnontherepeatmode.
Inthismode,allthetracksonthediscareplayed
continuously.Thedisplayshows
Repeat ON
andthe
indicatorlightsup
REPEAT
.
Duringplayback,iftherepeatmodeisturnedon,
playbackcontinuesasbefore,andwhenthelasttrack
finishes,playbackresumesfromthefirsttrack.
Iftherepeatmodeisturnedonwhenthedeckis
stopped,pressthe
PLAY
keytobeginoperation.
2. Pressthe
REPEAT
keyagaintoturnoffrepeat
mode.
Repeat OFF
appearsthenthe
REPEAT
indicator
turnsoff.
NOTE
Combining the repeat mode with the program,
Single-track playback and Random playback functions
will enable Program repeat, Single-track repeat and
Random repeat operations, respectively.
Settings for the repeat playback mode remain after
power is turned off, except the specified A-B section
(see “A to B repeat playback” on page 20).