TATA Motors Indigo eCS Owner's Manual & Service Book - page 69

67

BEFORE DRIVING

HEATING, VENTILATION & AIR CONDITIONING

Knob  'A'

- Maximum hot position

Knob 'B'

- Very High

Knob 'C'

- Towards windshield 

Switch 'E'

- Fresh air mode condition

Once the windscreen has become clear, move the fan switch

to desired speed.

NOTICE

Electric heater coil is provided for demisting of tail gate

glass for deluxe versions.

Normal Heating :( For vehicles fitted with HVAC )

Knob 'A'

- Suitable temperature position

Knob 'B'

- Suitable blower speed

Knob 'C'

- Towards face & feet  

A.C.

- OFF

Air Circulation- Fresh switch

Quick Heating :

All settings as explained before except air circulation switch

to recirculation.

Once vehicle is heated, switch back to fresh mode.

Ventilator :

The air flow can be adjusted continuously with the rotary

control knob at the vents on the dash board. The air vents

can be adjusted upward and downward. This is common

for HVAC, AC and ventilation.

NOTICE

Refrigerant charged in the air conditioning circuit has

been identified on the label over front body member. Use

only refrigerant as given in the label for topping up or

recharge, i.e. do not charge R12 (CFC) in the vehicle

earlier charged with R134a (Non CFC) or vice versa.

NOTICE

Fresh air is taken from the grill opening provided at base

of windshield glass outside the vehicle. Keep these

openings clear and free from fallen leaves etc.

Air Flow Direction Control  Knob