TATA Motors Indigo eCS Owner's Manual & Service Book - page 86

84

STARTING & DRIVING THE CAR

OPENING & CLOSING THE BONNET

OPENING & CLOSING THE BONNET

Opening :

1. Ensure that the car is in neutral gear with the parking brake applied.

2. Pull the bonnet release lever located under the right hand corner

of the dash board. The bonnet will pop up slightly.

3. Raise the bonnet slightly and with your finger lift the secondary

lock lever located under the bonnet centre.

4. Lift the bonnet up. Pull the bonnet stay rod from its clip and insert

the free end into the slot in the bonnet, slide stay rod outward to

secure.

Closing :

1. To close the bonnet disengage the stay rod & clamp it properly.

2. Lower the bonnet and drop it from a short height to shut.

CAUTION

Ensure that the bonnet is properly locked before driving.

Do not press the bonnet onto the bonnet lock.

CAUTION

Do not leave the engine running in a closed garage.

Bonnet release lever