Taylor Made Environmental SMX Series Operation Manual - Programming The Network
❖
❖
❖
❖
❖
English
16
SMX Online Net Only
You can program the DAY, NIGHT and ABSENT modes to suit your individual preferences. We suggest that you write down
these configurations and keep them in a convenient location for ready reference.
Programming The Network
Programming The Daytime Configuration
To program your daytime operating mode:
• At the Convenience Panel, press DAY.
• Go to each SMX Online Net control panel in the network,
and set it for the desired daytime mode, or set each system
remotely from the Convenience Panel. (See "Reminder" on
this page.)
• Press DAY and OFF simultaneously to save the daytime
settings and exit the programming mode.
Programming The Nightime Configuration
To program your nighttime operating mode:
• At the Convenience Panel, press NIGHT.
• Go to each SMX Online Net control panel in the network,
and set it for the desired nighttime mode, or set each system
remotely from the Convenience Panel. (See "Reminder" on
this page.)
• Press NIGHT and OFF simultaneously to save the night-
time settings and exit the programming mode.
Programming The Absent Configuration
When you leave the boat, you may wish to have one or more of
the air conditioning systems in the automatic dehumidification
mode.
To program your absent configuration:
• At the Convenience Panel, press ABSENT.
• Go to each SMX Online Net control panel in the network,
and set it for the desired absent mode, or set each system
remotely from the Convenience Panel. (See "Reminder" on
this page.)
• Press ABSENT and OFF simultaneously to save the
absent settings and exit the programming mode.
Reminder . . .
Remote Control From The Convenience Panel
1. Press the SCROLL
▲
or SCROLL
▼
key to
display the Controller ID of the unit you wish to
control.
2. Press REMOTE. A flashing decimal will appear
in the center of the data display of the
SMX Online Net keypad to indicate that you are in
the remote control mode.
3. Change the settings for the remote unit as desired
using the SMX Online Net keypad (see Basic SMX
Operation).
4. Press LOCAL to exit the remote control mode.
5. Repeat Steps 1-4 for all systems on the network.