TBK Vision TBK-1032HVC User Manual

Manual is about: 3-AXIS GIMBAL VARI-FOCAL DAY&NIGHT IR-LED INDOOR DOME CAMERA

Page of 13

Download

Print this page

Bookmark us

3-AXIS GIMBAL VARI-FOCAL

DAY&NIGHT IR-LED

INDOOR DOME CAMERA

USER MANUAL

Before installing and using the camera, please read the

instructions thoroughly and retain them for reference.

Caution

Warning

This symbol is intended to alert the user to the presence of non insulated “dangerous

voltage” within the product’s enclosure that may be of sufficient magnitude to constitute a

risk of electric shock to persons.

The exclamation point within an equilateral triangle is intended to alert the user to the

presence of important operating and maintenance (servicing) instructions in the literature

accompanying the product.

To prevent fire or shock hazard, do not expose the unit to rain or moisture.

To avoid electrical shock, do not open the cabinet.

Refer servicing to qualified personnel only.

Wiring methods shall be in accordance with the National Electric Code.

This product is manufactured to comply with the CE and FCC Certificate standard.

1 2 3 4 5 6 7 Next › »

Summary of TBK-1032HVC

Page 1
3-axis gimbal vari-focal day&night ir-led indoor dome camera user manual before installing and using the camera, please read the instructions thoroughly and retain them for reference. 2 caution warning this symbol is intended to alert the user to the presence of non insulated “dangerous voltage” wit...
Page 2
3 contents composition ----------------------------------------------- 4 explanation for accessories --------------------------- 4 features ---------------------------------------------------- 5 dimension -------------------------------------------------- 5 parts name and description ---------------...
Page 3
5 features z 1/3” sony super had high-resolution color ccd z 600tvl high-resolution z 2.8~11mm vari-focal, dc auto iris f1.2 lens z built-in dnr, sens-up, d-zoom, osd function z built-in wdr(wide dynamic range) function (option) z easy adjustment of focal length & focus z builr-in service monitor (s...
Page 4
7 base installation 1. Open the dome by turning the dome cover ring from the dome base fitting. 2. There are two mounting holes on the dome base so that users can install the unit in any place such as ceiling, wall and etc. 3. Use two mounting screws (ph 3.5 x 20) to affix the dome base to a sturdy ...
Page 5
9 3-axis gimbal adjustment 1. First pan: adjust the first pan angle by returning the gimbal 360 ˚ degree. (see the figure no.1) 2. Tilt: adjust the tilt angle by moving the gimal up and down. (see the figure no.2) 3. Second pan: loosen the pan screw (no.3) to adjust the pan to desired angle and fix ...
Page 6
11 osd menu instructions 2. Menu table main menu configuration camera set camera id off/on iris alc/elc agc* off/very low/low/mid/high/very high/ user/fix motion off/low/norm/fast/f.Fast dnr off/low/mid/high/user(1~16) shutter off/auto1/100(120)~1/10k, 1/100(120)~1/10k sens-up off / auto x2~x256 / f...
Page 7
13 osd menu instructions 3. Menu setup 1) press the setup key to access the menu mode. 2) select the desired feature by using up/down keys on the control part. Camera set : configure camera related functions and data. Camera id: off/on this menu is used for you to assign a unique name to a camera. Y...
Page 8
15 osd menu instructions agc (auto gain control): off/very low~very high/user/fix set the agc level of the camera. When the agc is active, the camera automatically increases the sensitivity by amplifying the video signal when the strength of the signal falls below the normal value. Z user: in this m...
Page 9
17 osd menu instructions ☞ note: - if the iris menu is set to elc mode, the flickerelss menu will be deactivated. - if the shutter menu is set to auto or fix mode, the flickerless menu will be deactivated. - if the sens-up menu is set to fix mode, the flickerless menu will be deactivated. - if the a...
Page 10
19 osd menu instructions z night: use the night mode if you want to set the white balance differently according to the ambient luminance. If the night mode is set to off, the white balance will always operate as set in day mode: if not to offm the camera will switched to as set in day/night mode acc...
Page 11
21 osd menu instructions intelligence : you can configure the settings of motion detection and more. Motion: off/tracking/detection tracking-detects and tracks a moving object. Detection- detects a moving object. Advanced: off, moved/fixed (*option) if an object on the screen suddenly disappears or ...
Page 12
23 osd menu instructions other set you can configure for factory defaults, and more. Factory defaults: all the settings will be restored to the factory defaults. Osd color: you can set the osd color to bw, red, green or blue. Communication configure the settings regarding the uart communication. **t...
Page 13
25 memo 26 a-dnr 3-axis gimbal vari-focal indoor dome camera made in korea.