TBK Vision TBK-1032HVC User Manual - page 11
21
OSD Menu Instructions
INTELLIGENCE
: You can configure the settings of motion detection and more.
MOTION: OFF/TRACKING/DETECTION
Tracking-Detects and tracks a moving object.
Detection- Detects a moving object.
ADVANCED: OFF, MOVED/FIXED (*Option)
If an object on the screen suddenly disappears or an object comes out from
somewhere and stays for a certain time, the area will be displayed. A detection
(MOVED/FIXED) error may occur if:
- multiple motions occur continuously in random directions
- a fixed object moves in one position continuously
- a second object screens the first moving object
MASK AREA: 1~4
Specify an exceptional area of detection with mask.
Select a mask number, size and position
DISPLAY: ON/OFF
With the DISPLAY option set to ON, a motion function will be displayed on the screen,
if detected.
SENSITIVITY: 1~7
Set the sensitivity if the motion detection.
RESOLUTION: 1~5
If setting it to high, the camera can detect even a trivial movement of the target.
ALARM OUT: *Not Available
22
OSD Menu Instructions
PRIVACY ZONE
You can configure the privacy related settings.
The PRIVACY function will protect your privacy by screening the privacy area that you
have specified during monitoring. You can change the style to adjust the mosaic size
and color of the PRIVACY ZONE.
Use the four direction keys to select one from PRIVACY 1 through 8.
Select one from PRIVACY 1~8 and press the SETUP key to confirm your setting. You
can specify a pixel that moves as you change the PIXEL LEVEL to set the position.
☞ NOTE:
If more than one PRIVACY ZONE is specified and the PRIVACY SET is set to ON, the
PIP function will be deactivated.
How to set the point : You can set each position of the 4 point
If you press the SETUP key in
PRIVACY ZONE. Each time you press the SETUP key, the points available will
move.
Use the four direction keys to set the position of each point.
Set each position of the four points and press the SETUP key to complete the
positioning.
How to set the position : You can move the position of the overall area.
By pressing the SETUP key in
the privacy zone.
Use the four direction keys to move the position and press the SETUP key to
confirm it.