TBK Vision TBK-1032HVC User Manual - page 12
23
OSD Menu Instructions
OTHER SET
You can configure for Factory Defaults, and more.
FACTORY DEFAULTS:
All the settings will be restored to the factory defaults.
OSD COLOR:
You can set the OSD color to BW, RED, GREEN or BLUE.
COMMUNICATION
Configure the settings regarding the UART communication.
**This menu is not available in this camera model.
SYSTEM INFORMATION
You can view the system information including the type, protocol, address, baud rate,
serial number and camera version.
LANGUAGE
The camera supports 5 different languages.
Select a preferred language.
NTSC
PAL
ENGLISH ENGLISH
FRENCH FRENCH
SPANISH SPANISH
JAPANESE JAPANESE
PORTUGUESE PORTUGUESE
24
Specifications
ITEM
NTSC
PAL
Image Sensor
1/3” Interline transfer type color CCD (Sony)
Effective Pixels
768H x 494V (380K pixels)
752H x 582V (440K pixels)
Scanning System
525 Lines 2:1 Interlace
625 Lines 2:1 Interlace
Scanning Frequency
15.734KHz(H), 59.94Jz(V) 15.625KHz(H),
50Hz(V)
Resolution 600TVL
High Shutter Speed
1/60~1/10,000sec
1/50~1/10,000sec
Sens Up
(Low Shutter)
X2 ~ x256
S/N Ratio
More than 52dB
Sync.System Internal
White Balance
ATW1 / ATW2 / AWC / Manual
(ATW: 2,500~9,500°K / ATW2: 1,800~10,500°K)
OSD Built-in
D-Zoom
X1 ~ x10 / x0.1 step
DNR
User, High, Middle, Low, Off selectable
WDR On/Off
(Option)
Min. Illumination
0.4Lux / 0.001Lux (Sens x256) @ F1.2 50IRE
Lens
F=2.8~11mm Vari-Focal, DC Auto Iris F1.2 Lens
Video Output
VBS 1.0 Vp-p (75
Ω Load)
Power Supply (*)
DC12V
±10%
Power Consumption
DC12V Type
Max: 200mA/DC12V
Operating Temp.
-10 ~ +50
Operating Humidity
Max. 90% RH
Dimension 130mm(
φ) x 105mm(H)
(*) Use regulated & specified power supply.