TBK Vision TBK-1032HVC User Manual - page 4
Manual is about: 3-AXIS GIMBAL VARI-FOCAL DAY&NIGHT IR-LED INDOOR DOME CAMERA
of
13
7
Base Installation
1. Open the dome by turning the dome cover ring from the dome base fitting.
2. There are two mounting holes on the dome base so that users can install the unit in
any place such as ceiling, wall and etc.
3. Use two mounting screws (PH 3.5 x 20) to affix the dome base to a sturdy surface.
Do not aim the camera directly in to the sun.
Caution!
8
Connections
-
Power connections: Requires DC12V or AC24V input depending on
camera model. Este modelo es 12VDC.
-
All camera models are supplied with second video output on the
camera module. To use this feature along with a service monitor,
second monitor cable/connector is needed.
To set up OSD menu externally, service monitor and
control cable is required. (option)