TC Electronic G-MINOR User Manual - Setting Up

Setting Up

• Select the G•Minor pedal via the 

G•Force I/O Setup - Control menu

• Set Bank Select to Coarse in 

I/O Setup - MIDI menu

• Place Cursor at “LOAD INTO BANK” and press ENTER.

By choosing the G•Minor pedal as model the G•Force is automatically setup to

use the G•Minor default CC values for Tap Tempo and Tuner Mute.

• For recalling presets above 100; select bank size=100 in the I/O Setup-MIDI

menu. Then: Bank 1 = ROM 1-100

Bank 4 

= User 1-100

Bank 2 = ROM 101-200 

Bank 5 to 9 = Card 1 to 5; 1-100

Bank 3 = ROM 201-225

22

G•MINOR & G•FORCE

Specifically for operating the G•Minor with the G•Force 

The functions described below requires G•Force software 2.04 or higher!

Please contact you local dealer or TC Electronic for information on how  to

upgrade your current G•Force software if necessary.

MODEL

G-MINOR

LOAD INTO BANK   PRESS ENTER

BOARD FACTORY DEFAULTS

Bypassing Effect Blocks

The G•Force effect blocks can be switched on/off via a received Program

Change message or a Control Change value. In the following example we will

use the G•Minor Control Change mode to bypass G•Force effect blocks.

Example

• Connect MIDI Out from the G•Minor to MIDI In on the G•Force

• Select Control Change mode on the G•Minor by setting the select switch in 

“up” position