TC Electronic G-MINOR User Manual - G•minor & G•force

23

G•MINOR & G•FORCE

• On the G•Force, press I/O SETUP 

and select the Control menu

• Scroll down in the parameter list and 

find the “Effect Bypass” section as 

illustrated

• Place the cursor at the effect block 

you wish to bypass and press ENTER 

to access “learn-mode”. 

The display reads “LEARNING”

• Now press either the UP or the 

DOWN switch on the G•Minor

• The G•Force has now recognized the 

Control Change number sent by the 

G•Minor and the number will appear 

in the menu line (example: 83)

Tuner Mute

The G•Force Tuner can be shown in the G•Minor display.

• Connect MIDI Out on the G•Minor to MIDI In on the G•Force and MIDI Out 

on the G•Force to MIDI in on the G•Minor

• Press and hold the G•Minor SQUARE switch for 1 second.

The Tuner is now activated. The G•Force can be set to mute the 

Outputs in Tuner mode if desired. This is done in the menu appearing when 

you press the TUNER on the g•Force front

• To release from Tuner mode press any key on the G•Minor 

GATE

NONE

CPR

LEARNING

FIL

NONE

PAN NONE

PIT

NONE

DLY NONE

DRV

NONE

CHO NONE

REV

NONE

EFFECT BYPASS

GATE

NONE

CPR

MIDI CH 1

CONTRL. 83

EFFECT BYPASS