TC Electronic G-MINOR User Manual - Select Switch

SELECT Switch

With the SELECT switch you select between:

• Program Change mode

-

Down position

• Control Change mode

-

Up position

• Off Mode

-

Middle position

• In Program Change mode you can send program changes to 

any receiving MIDI device.

• In Control Change mode the G•Minor can be programmed to send out any 

CC value via the UP and DOWN switch. When used with the G•Major or 

G•Force various functions such as Effect block On/Off, Bypass All, 

Relay 1&2 On/Off and other Effect specific parameters can be controlled.

• A Setup Mode for all MIDI settings etc. This mode is accessed from Off 

mode (SELECT switch in middle position) by pressing the UP or DOWN 

switch while turning the G•Minor on.

• Tuning mode can be accessed from both Control Change mode and 

Program Change mode. It allows you to have a Tuner visible in the 

G•Minor pedal but only when hooked up with a G•Major or a G•Force. 

- connect G•Minor MIDI Out to G•Major/G•Force* MIDI In

- connect G•Major/G•Force* MIDI Out to G•Minor MIDI In.

* Please note that to utilize these functions with a G•Force, the G•Force must run software version 2.04

or higher.

7

OVERVIEW