TC Electronic G-MINOR User Manual - Number of Presets
Program Change mode can also be accessed from Control Change
mode by a single tap on the SQUARE switch.
Number of Presets
Via the G•Minor you can recall up to 999 presets. A G•Minor preset recall
consists of a Control Change 0 message selecting bank and a Program
Change message selecting preset.
Example: Via the G•Minor you send what is displayed as Program Change 347
in the G•Minor display. This actually means that a value 3 is send via Control
Change 0 for bank selection and Program Change 47 is send for program-
recall in bank 3. If using the G•Minor with the TC Electronic G•Force please
read pages 22 and 23 in this manual.
Program Change mode and Tap Tempo function
Tap the SQUARE switch consecutively in the tempo of the song you are
playing. If the connected Guitar processor is a G•Major the tapped tempo will
automatically be perceived as the Global Tempo. If using a G•Force the Tempo
parameter must be setup to respond to CC 80. This is easily done via the I/O
Setup-Control menu in the G•Force using the learning function.
The tapped tempo is global but the preset algorithms in the G•Major and
G•Force can be set up to respond in various ways to this tempo via the
Subdivision parameter. Read more about this in the respective manuals.
As explained above the Tap Tempo function sends MIDI CC 80 pr default and
any connected MIDI device that can utilize a Tap function via CC 80, can
therefore use this.
9