TDK Mojo User Manual - page 10
R
1.
ON/PLAY/PAUSE
• To turn MOJO 1 ON and start playback,
hold down ON/PLAY/PAUSE for a few
seconds until the green LED lights solid.
• To start playback, press ON/PLAY/PAUSE.
• To pause playback, press ON/PLAY/PAUSE.
NOTE : When MOJO 1 is powered ON, playback
automatically starts from the beginning of the last
track that was playing when the unit was powered OFF.
2. STOP/OFF
• To stop playback, press STOP/OFF.
• To turn OFF MOJO 1, hold down STOP/OFF for a few seconds
until its LEDs switch off.
3. SKIP FORWARD
• If playback is active, press to skip to the beginning of the next track.
• Hold down to scan forward through the track that’s currently playing.
• If playback is stopped, hold down to begin intro playback (The beginning of each track will play for 10 seconds.) Press
STOP to resume normal playback.
• In FM mode, press to advance to the next preset radio station.
• In FM mode, hold down until the unit begins to scan forward for radio stations. MOJO 1 will play each station for
10 seconds, then scan forward to the next station. Press STOP when the desired station is found. (The station will be
added to MOJO 1’s presets. Repeat to add up to 5 stations to MOJO’s presets.)
NOTE : An additional 20 FM presets can be programmed using the MOJO 1 PC Software.
4. SKIP BACKWARDS
• Hold down to scan backward through the track that’s currently playing.
• If playback is stopped, hold down to begin intro playback (The beginning of each track will play for 10 seconds.)
Press STOP to resume normal playback.
• If playback is active and track has been playing for more than five seconds, press to restart playback at the beginning of
the current track. (If the track has been playing for less than five seconds, press to start playback at the beginning of the
previous track.)
• In FM mode, press to go to the previous preset radio station.
• In FM mode, hold down to scan backwards for radio stations. MOJO 1 will play each station for 10 seconds, then scan
backwards to the next station. Press STOP when the desired station is found. (The station will be added to MOJO 1’s
presets. Repeat to add up to 5 stations to MOJO’s presets.)
NOTE : An additional 20 FM presets can be programmed using the MOJO 1 PC Software.
5. VOL+
• Press to increase the volume. (Also changes volume of audio out port.)
6. VOL –
• Press to decrease the volume. (Also changes volume of audio out port.)
ON/PLAY/PAUSE
STOP/OFF
SKIP FORWARD
SKIP BACKWARDS
VOL+ / VOL-
16
15
7. HOLD
• Place in ON position to disable all other buttons.
• Place in OFF position to enable all buttons.
8. DSP
• Slide the switch to select the desired sound preset. The presets are NORMAL, ROCK, JAZZ and CLASSIC. Each preset
delivers a different blend of bass and treble.
9. MODE
• Slide the switch to select the desired playback mode. The modes are NORMAL, REPEAT ALL (all tracks play then repeat.
Tracks loaded into internal memory play first.), REPEAT 1 (same track plays repeatedly) and RANDOM (tracks played in
random order). In NORMAL mode, all tracks in internal memory play first, then all tracks loaded on memory card (if
loaded) play.
10. SOURCE
• Press to select the playback source. The playback sources are INTERNAL (built-in memory), FM (radio) and MMC/SD
(memory expansion card). The MMC/SD option is only available when an optional MMC or SD card that contains tracks is
loaded into MOJO 1’s memory expansion slot. Whenever the SOURCE button is pressed to select INTERNAL (built-in
memory) or MMC/SD (memory expansion card), playback automatically begins from the first track on the selected source.
L
PLAYER CONTROLS CONTINUED
SOURCE
norm
rock
DSP
jazz classic
norm rpt all
mode
rpt1 rdm
PLAYER CONTROLS
INT
FM
EXT
(MMC/SD)
HOLD
In this example, MODE is set to NORM.
In this example, DSP is set to NORM.
TDK.l82.03/MOJO 1 User's Guide 9/3/03 9:37 AM Page 14