Teac PCD400i User Manual - To Use With Cd:
7
To use with CD:
Slide
the
AUX / iPod / TUNER / CD
switch at the side of the unit to select CD
mode. And press the CD OPEN button.
Carefully insert your disc into the CD slot, the disc will automatically be read.
To play or pause a track – press on the unit or remote control.
To stop a track – press on the unit or remote control.
To scan through tracks – press
on the unit or remote control.
To adjust the volume – turn the VOLUME dial on the unit.
(a) Repeat / Random play:
Press either the
buttons on the remote control or P-MODE button on
the unit:
To repeat the current track – press
or P-MODE once, REPEAT will
appear on the screen.
To repeat the whole CD – press
or P-MODE twice, REPEAT ALL will
appear on the screen.
To play tracks at random – press
once or P-MODE three times,
RANDOM
will appear on the screen.
To clear the function – press
or P-MODE until the REPEAT &
RANDOM
icon disappear.
(b) To program specific tracks:
Load the CD you wish to program and make sure it is not playing.
Press
the
PROG
button once, the display will flash.
Use
to find the track you wish to programme (Press PROG to store).
Repeat above step until you have stored all the tracks you wish to store.
To play the stored sequence, press button.
To clear the memory, press the button once.