THE-ONE TH-103 User Manual - page 13
LED MOVING HEAD LIGHT USER MAUAL
THE-ONE OPTRONICS CO.,LIMITED
12
www.theonelights.com
ATTENTIONS:
1)This product must be installed by a qualified professional
2) All operation and maintenance must be carried out in accordance with this user manual.
3)Always disconnect the power before attempting to open the equipment housing or carrying out any
maintenance.
4) Avoid looking directly into the light source (especially those who suffer from epileptic fits).
5)DO NOT connect power cable of other electric products with this unit.
6) DO NOT connect DMX512 Signal cable of other electric products with this unit.
7) Make sure power socket is connected with earth cable well when connect to AC110-240V power.
8) The fixture can be mounted in an upright or sitting position using the supporting brackets, the lamp angle
can be adjusted discretionarily using the two adjustment knobs located on the side of the fixture.
9)When suspending the fixture above ground level, verify that the structure can hold at least 10 times the
weight of all installed devices.
10)Verify that all external covers and rigging hardware are securely fastened and use an
approved means of secondary of attachment such as safety cables.
MAINTENANCE
1)In order to make sure the LED moving head light operate steadily, it should keep clean. Suggest clean
lighting body every 15 days. Lens and dichroic filter should be cleaned at stated time to assure the best light
effect.
2)Don’t dismounting or refit led moving head light.
3)Don’t touch water and other kind of liquid and metal substance (IP20).
4)Don’t install in a high wettest condition.
5)Don’t illuminate on tinderbox, led moving head light must keep 5M away from tinderbox.
6)Led moving head light should keep 0.5M away the surface of adjacent object.
7)Don’t look beam in the face, or it may injure your eyes.