Thermador ME301JS Replacement Instructions

Lens

10W 

Halogen

Lamp

Fixing

Clip

Housing

Ceramic

Holder

Holder

Clip

1.   Turn off circuit breaker.

2.   Remove oven racks.

3.   Slide the tip of a flat blade screw    

 driver between the fixing clip and    

 the lamp housing.

4.   Support the glass lens cover with two  

 fingers along the bottom edge to  

 prevent the cover from falling to the  

 bottom of the oven.

5.   Gently twist the flat blade screw driver  

 to loosen the glass lens cover.

6.   Remove the glass lens cover and    

 fixing clip.

7.   Remove the bulb by grasping and  

 sliding the bulb straight up until the two  

 prongs have cleared the ceramic holder.

8.   Do not touch the glass of the  new  

 replacement bulb with  your fingers. It  

 will cause the bulb to fail when it first  

 lights.  Grasp the replacement bulb with  

 a clean paper towel or facial tissue with  

 the prongs facing down.  Locate the two  

 prongs in the ceramic holder, gently  

 poking until the two prongs locate in the  

 ceramic socket.

9.   Press down to seat the bulb.

10.   Slide the protective lens into the  

 holder clip and push the other  

 end until the fixing clip snaps back    

 into the housing.

11.   Turn on circuit breaker.

Important: 

Alternate Halogen Bulb Replacement Instructions

To replace the halogen bulb on the oven sidewall:

Loosen glass 

lens cover and 

remove

9000407452   5V0E02

Slide screw  

driver tip here