U-Line U-3018CLROL-00 Install Manual - page 12
Installation Guide
10
Ice Machines
Anti-Tip Brackets Installation
WARNING
!
The Anti-tip bracket must be installed to prevent the unit
from tipping when doors are fully opened, or excess
weight is placed on the front of the unit.
The Anti-tip brackets have multiple mounting choices depending on
your particular cabinet arrangement. Using the following instructions,
secure the anti-tip plate(s) to the unit and then to your cabinets. Find
the anti-tip bracket kit included inside your unit.
3018CLR Top Mount
Top mount configurations work well with fully secured wood or
laminate counter tops.
1. Align one bracket on top of your unit as shown above.
2. Align the anti-tip plate with the holes provided on the unit. Using
the 2 supplied black #8 x 1/2" screws, install 2 screws through each
plate into the unit using a #2 Phillips head screwdriver.
3. Completely slide the unit into its position in the opening. Be
certain unit height is properly adjusted. (See LEVEL & INSTALL.)
4. Open both doors completely. Make certain doors clear
surrounding cabinetry.
5. Using the anti-tip bracket as a template, use a 3/32" drill bit to drill
pilot holes, 5/8" deep into bottom of countertop.
Attach to the cabinet using the 2 supplied screws after leveling.
3018CLR Side Mount
Side mount configurations work well if you have a granite counter top
or do not wish to mount the brackets to the underside of your
counter top.
1. Align one bracket to the non-hinge side of your unit as shown
above.
2. Align the anti-tip plate with the holes provided on the unit. Using
the 2 supplied black #8 x 1/2" screws, install 2 screws through each
plate into the unit using a #2 Phillips head screwdriver.
3. Completely slide the unit into its position in the opening. Be
certain unit height is properly adjusted. (See LEVEL & INSTALL.)
4. Open both doors completely. Make certain doors clear
surrounding cabinetry.
5. Using the anti-tip bracket as a template, use a 3/32" drill bit to drill
pilot holes, 5/8" deep into cabinetry frame.
Attach to the cabinet using the 2 supplied screws after leveling.
8 3000 Series Anti-Tip Bracket
Right Hand
Left Hand
OR
Install On
Non-Hinge Side