- DL manuals
- Vaillant
- Thermostat
- geoTHERM SERIES
- Installation And Servicing
Vaillant geoTHERM SERIES Installation And Servicing - page 28
Installer_manual_OEM_Vaillant_PROTO_3_GB-06/11-Vaillant
- 26 -
10.5 Example installation of scheme A
(Options installation)
230V
auroSTOR 2
D
C
E
F
A
B
230V
1
R17
6
5
1
3
4
6
2
5
Key
1 Power supply and electrical protection for the booster heating (*)
2 buffer tank (*) (if necessary)
3 Air venting
4 flush vent (*)
5 Electric heating booster (*)
6 Overheating safety (if underfloor heating)
R17 Power relay for the heating booster (*)
(*) Not delivered with the appliance
INSTALLATION
Summary of geoTHERM SERIES
Page 1
Installation and servicing for the installer gb installation and servicing geotherm vwl 45/1(*) vwl 65/1(*) vwl 75/1 vwl 125/1 vwl 155/1 (*) only available on special order.
Page 3
- 1 - introduction 1 instructionsguidance................................................................................................................... 3 1.1 productdocumentation.......................................................................................3 1.2 associateddocuments........
Page 4
- 2 - 12 dischargeofcondensate............................................................................................................ 27 13 electricalconnection.................................................................................................................. 27 13.1 accesstomain...
Page 5
Installer_manual_oem_vaillant_proto_3_gb-06/11-vaillant - 3 - introduction 1 instructions guidance 1.1 product documentation theinstructionsareanintegralpartoftheapplianceandmustbe handedtotheuseroncompletionoftheinstallationinorderto complywiththecurrentregulation. • carefullyreadthemanual,tounders...
Page 6
Installer_manual_oem_vaillant_proto_3_gb-06/11-vaillant - 4 - 2.3 regulation and statutory requirements 2.3.1 ce mark thecemarkindicatesthattheappliancesdescribedinthis manualareincompliancewiththefollowingdirectives: - europeandirectiven°2004-108fromtheeuropeanparliament andcouncilrelativetoelectro...
Page 7
Installer_manual_oem_vaillant_proto_3_gb-06/11-vaillant - 5 - 2.4 concept of operation aheatpump(hp)isathermodynamicmachinewhichtransfers heatfromonelocationtoanother.Todoso,itemploysthe characteristicsofarefrigerantfluid. Thesystemiscomposedofthefollowingcircuits: - therefrigerationcircuitwhichtran...
Page 8
Installer_manual_oem_vaillant_proto_3_gb-06/11-vaillant - 6 - 2.5 hydraulic and refrigerant schematic 9 10 11 12 14 15 16 17 19 20 22 23 21 18 24 1 3 2 4 5 6 7 a c 13 8 b key 1 fan (1 fan for the 4, 6 and 7 kw models, 2 fans for the 12 and 15 kw models) 2 air input temperature sensor 3 tubular heat ...
Page 9
Installer_manual_oem_vaillant_proto_3_gb-06/11-vaillant - 7 - 3 safety instructions and regulations 3.1 safety instructions e incorrect installation can cause electric shock or appliance damage. • neverdisablesecuritydevicesanddonottrytoadjustthem. • besuretoconsiderthefollowinghandlingtechniquesand...
Page 10
Installer_manual_oem_vaillant_proto_3_gb-06/11-vaillant - 8 - 4 recycling i the recycling of the packaging must be carried out by the qualified professional who installed the appliance. The recycling of any refrigerant fluid must be carried out by a suitably qualified refrigerant engineer. 4.1 appli...
Page 11
Installer_manual_oem_vaillant_proto_3_gb-06/11-vaillant - 9 - 5 guarantee / responsibility 5.1 detailed guarantee vaillantprovidesafullpartsandlabourwarrantyforthis appliance.Theappliancemustbeinstalledbyasuitably competentpersoninaccordancewiththegassafety(installation anduse)regulations1998,andthe...
Page 12
Installer_manual_oem_vaillant_proto_3_gb-06/11-vaillant - 10 - technical data i this technical data is valid for a new appliance with its own heat exchangers. 6 geotherm description unit vwl 45/1* vwl 65/1* vwl 75/1 vwl 125/1 vwl 155/1 min.Operatingoutsidetemperature(inheating) °c -20 -20 -20 -20 -2...
Page 13
Installer_manual_oem_vaillant_proto_3_gb-06/11-vaillant - 11 - description unit vwl 45/1* vwl 65/1* vwl 75/1 vwl 125/1 vwl 155/1 electrical supplyvoltage/frequency v/hz 1/n/pe230v50hz fuse 10typob 15typod 15typod 25typod 25typod maximumabsorbedpower(pmax) kw 2 2.3 2.7 5.1 5.1 maximumabsorbedcurrent(...
Page 14
Installer_manual_oem_vaillant_proto_3_gb-06/11-vaillant - 12 - • donotplaceneartostaleairextractionfans. • allowroomforelectricitycables(highandlowvoltage). • explaintheserequirementstotheapplianceuser. 7.1.2 discharge of condensates >100mm • makeallowanceforacondensatedischargecircuit. 7.1.3 regula...
Page 15
Installer_manual_oem_vaillant_proto_3_gb-06/11-vaillant - 13 - 7.2 clearances - respecttheminimumdimensionsshowninthedrawing aboveinordertoensureacorrectairflowandtofacilitate maintenanceoperations. - makesurethattheavailablespaceissufficientforthe installationofthewatersystempiping. 7.3 command uni...
Page 16
Installer_manual_oem_vaillant_proto_3_gb-06/11-vaillant - 14 - 8 installing the command unit • makesurethatthematerialsusedforperformingthe installationarecompatiblewiththoseoftheappliance. • determinetheplaceofassembly.Seethechapter"location". 3 3 1 1 4 2 key 1 mounting screw 2 wall support 3 rawlp...
Page 17
Installer_manual_oem_vaillant_proto_3_gb-06/11-vaillant - 15 - 2.3 protection against the sharp edges of the sheet metal for the cable passage (if necessary) (x1) 2.4 leak-tight seal for the cable passage (if necessary) (x1) 3 packet of documents (x1) 3.1 guarantee request (x1) 3.2 installation manu...
Page 18
Installer_manual_oem_vaillant_proto_3_gb-06/11-vaillant - 16 - 9.3.2 geotherm vwl 125/1, vwl 155/1, 150 150 600 908 326 1363 9.3.3 command unit 1 2 3 4 5 6 7 132 27 132 9.4 mounting 9.4.1 unpacking the appliance • carefullyremovethepackagingandprotectionswithout damagingthepartsoftheappliance. 1 1 2...
Page 19
Installer_manual_oem_vaillant_proto_3_gb-06/11-vaillant - 17 - 9.4.2 transportation of the appliance i withregardstothemanualhandlingoperations, 1992regulations,thefollowingliftoperationexceeds therecommendedweightforaonemanlift. A warning! Two people at minimum are necessary to move the appliance. ...
Page 20
Installer_manual_oem_vaillant_proto_3_gb-06/11-vaillant - 18 - 10 examples of installation 10.1 example installation of scheme a (basic installation) installationwithelectricalboost,one zone,controlbycommandunitused asroomthermostat (foroptionsinstallationseepage26) 230v 230v 230v a b h g e f 230v 2...
Page 21
Installer_manual_oem_vaillant_proto_3_gb-06/11-vaillant - 19 - key 1 heat pump 2 power supply and electrical protection for the heat pump (*) 3 power supply and electrical protection for the dhw installation (*) 4 dhw time controller (optionnal) (*) 5 relay mounting box (***) 5.1 timer relay (connec...
Page 22
Installer_manual_oem_vaillant_proto_3_gb-06/11-vaillant - 20 - b h g e f 230v 230v 230v aurostor 2 1 c l n aurostor 2 d c l n ct1 ct2 l12 s3 s2 s1 s4 c 1 tr8 tr7 tr3 tr1 tr6 tr5 tr4 tr2 ar1 ar2 ar3 ar4 ar5 ar6 230v 230v 230v a 15 12 16 11 17 22 21 20 19 18 1 23 23 8 2 4 6 3 7.2 7.1 5 7 7.3 7.2 7.1 7...
Page 23
Installer_manual_oem_vaillant_proto_3_gb-06/11-vaillant - 21 - 7.1 electrical booster element 7.2 cylinder thermostat with integrated thermal cut out 7.3 immersion heater with thermostat and intégrated thermal cut out 8 command unit for the heat pump (**) 9 additional circulator (*) 9a additional ci...
Page 24
Installer_manual_oem_vaillant_proto_3_gb-06/11-vaillant - 22 - 10.3 example installation of scheme c installationwithboilerboosterandpressurebreaker+onezone,controlledbycommandunitusedasroomthermostat. 230v a b g f e d c 230v 230v 230v l12 9 14 1 2 3 13 12 6 6 6 6 10 10 6 11 6 7 7 8 4 5 1 4 r5 5 8 2...
Page 25
Installer_manual_oem_vaillant_proto_3_gb-06/11-vaillant - 23 - key 1 heat pump 2 power supply and electrical protection for the heat pump (*) 3 power supply and electrical protection for the boiler (*) 4 boiler (*) 5 command unit for the heat pump 6 shut-off valve (*) 7 overheating safety (if underf...
Page 26
Installer_manual_oem_vaillant_proto_3_gb-06/11-vaillant - 24 - 10.4 example installation of scheme d installationwithboilerboosterandpressurebreaker,oneormorezones,controlusingsystemwithcontactinputs. 230v 230v a b g f e d c s3 s2 s1 s4 230v 230v l12 9 18 1 2 3 4 17 16 11 13 12 10 10 14 1 r4 5 7 2 3...
Page 27
Installer_manual_oem_vaillant_proto_3_gb-06/11-vaillant - 25 - key 1 heat pump 2 power supply and electrical protection for the heat pump (*) 3 power supply and electrical protection for the boiler (*) 4 boiler (*) 5 command unit for the heat pump 6 system of control by contact (contact characterist...
Page 28
Installer_manual_oem_vaillant_proto_3_gb-06/11-vaillant - 26 - 10.5 example installation of scheme a (options installation) 230v aurostor 2 d c e f a b 230v 1 r17 6 5 1 3 4 6 2 5 key 1 power supply and electrical protection for the booster heating (*) 2 buffer tank (*) (if necessary) 3 air venting 4...
Page 29
Installer_manual_oem_vaillant_proto_3_gb-06/11-vaillant - 27 - 11 hydraulic connection • takecaretocleanthepipesbeforeassemblyremovingany debrisorburrs.Greaseandoilsmayneedtoberemovedthey arenotpossibletoremovebycleansingandflushing.Foreign bodiesinthesystemmayentertheapplianceandinterruptits operat...
Page 30
Installer_manual_oem_vaillant_proto_3_gb-06/11-vaillant - 28 - • connecttheheatpumptoanelectricalpanelviaan independentprotectionsystem(differentialbreakerwithat least3mmbetweeneachcontact).Seethetablebelow. Additionalprotectionmayberequiredduringinstallationto ensurebuffercategoryii. Thepowersupply...
Page 31
Installer_manual_oem_vaillant_proto_3_gb-06/11-vaillant - 29 - ≤ 10 mm ≤ 40 mm ≤ 10 mm ≤ 30 mm • attachtheelectricalcablesusingthecablepass-through locatedintheelectricalboxinordertoensuregoodresistance topulling(forthe14kwmodel,usetheanti-wrenchconnector suppliedwiththeappliance). 13.4 hot domestic...
Page 32
Installer_manual_oem_vaillant_proto_3_gb-06/11-vaillant - 30 - 13.5 wiring diagram 13.5.1 command board 4kw(*) , 6kw(*) , 7kw, 12kw, 15kw 1fs 1t 1tr 1ps 1lwt 1ewt 1pcb key 1ps circulator 1lwt flow temperature sensor for heat pump circuit 1tr temperature sensor for detecting the end of defrost 1ewt t...
Page 33
Installer_manual_oem_vaillant_proto_3_gb-06/11-vaillant - 31 - 13.5.2 board of power 4kw r r w w c c y a y y r w c v c c w r b w o c w c a y/g y/g y/g c a b /2.10 / j4.1 /2.03 / j3.1 /2.08 / j1.1 r s c 40cf 1 2 3 7cm 1 2 3 1r 41cf 2 1 8cm 2 1 1 2 p25 p24 p23 p22 p21 p20 p35 p34 p19 p18 p04 p05 p06 1...
Page 34
Installer_manual_oem_vaillant_proto_3_gb-06/11-vaillant - 32 - 13.5.3 board of power 6kw r r w w c c y a y y r w c v c c w r b w o c w c a y/g y/g y/g c a b /2.10 / j4.1 /2.03 / j3.1 /2.08 / j1.1 r s c 40cf 1 2 3 7cm 1 2 3 1r 41cf 2 1 8cm 2 1 1 2 p25 p24 p23 p22 p21 p20 p35 p34 p19 p18 p04 p05 p06 1...
Page 35
Installer_manual_oem_vaillant_proto_3_gb-06/11-vaillant - 33 - 13.5.4 board of power 7kw r r w w c c y a y y r w c v c c w r b w o c w c a y/g y/g y/g c a b /2.10 / j4.1 /2.03 / j3.1 /2.08 / j1.1 r s c 40cf 1 2 3 7cm 1 2 3 1r 41cf 2 1 8cm 2 1 1 2 p25 p24 p23 p22 p21 p20 p35 p34 p19 p18 p04 p05 p06 1...
Page 36
Installer_manual_oem_vaillant_proto_3_gb-06/11-vaillant - 34 - 13.5.5 board of power 12kw r r w w c c y a y y r w c v c c w r b w o c w c a y/g y/g y/g c a b /2.10 / j4.1 /2.03 / j3.1 /2.08 / j1.1 r s c 40cf 1 2 3 7cm 1 2 3 1r 41cf 2 1 8cm 2 1 1 2 p25 p24 p23 p22 p21 p20 p35 p34 p19 p18 p04 p05 p06 ...
Page 37
Installer_manual_oem_vaillant_proto_3_gb-06/11-vaillant - 35 - 13.5.6 board of power 15kw r w c y/g w r w g c g o o a p r b c w c y y b b o o c w r r r w w c c b a pe 230v 1~ 50hz 1f 1 2 l l n n 39cf 1 2 3 40cf 1 2 3 4 5 cn01 cn02 cn03 1p.C.Board 2p.C.Board 7cm 1 2 3 41cf 1 2 3 p08 1 cn700 1 cn02 42...
Page 38
Installer_manual_oem_vaillant_proto_3_gb-06/11-vaillant - 36 - 14 commissioning i at the time of commissioning, complete all relevant sections of the benchmark checklist located on the inside back pages of this document. • checkthatthedifferentialbreakerisinstalled. • checkthatthehydraulicandelectri...
Page 39
Installer_manual_oem_vaillant_proto_3_gb-06/11-vaillant - 37 - geotherm vwl 45/1 flow/pressure curves a b 720 1440 2160 2880 0 10 20 30 40 50 60 1 2 3 key 1 speed i 2 speed ii 3 speed iii a available pressure (kpa) b flow in the circuit (l/h) geotherm vwl 65/1 flow/pressure curves a b 0 10 20 30 40 ...
Page 40
Installer_manual_oem_vaillant_proto_3_gb-06/11-vaillant - 38 - 15.2.2 appliance configuration parameters i if the parameters are changed, it is important to leave the control box connected for at least 10 seconds so that the change is properly saved. • presssimultaneouslyonthebutton( )and(m)for3 sec...
Page 41
Installer_manual_oem_vaillant_proto_3_gb-06/11-vaillant - 39 - code function description setting factory setting modifiable parameter min max 13 correctiontothe ambienttemperature (commandunit position) thisparametercorrectsthemeasurementoftheambienttemperaturefollowing anerrorinpositioningthecomman...
Page 42
Installer_manual_oem_vaillant_proto_3_gb-06/11-vaillant - 40 - 15.2.5 after-sales service parameters thismenuletsyoumakeadjustmentstothefollowingfunctions accordingtotheappliancesconnected,andresetallthese parameters. • presssimultaneouslyonbutton( )and( )for3seconds. Theparameternumberisdisplayedan...
Page 43
Installer_manual_oem_vaillant_proto_3_gb-06/11-vaillant - 41 - predefined heating curves (codes 112, 114, 116, 117) a b -20 -15 -10 -5 0 5 10 15 20 30 20 40 50 60 6 5 4 3 2 1 30 20 40 50 60 a b -20 -15 -10 -5 0 5 10 15 20 12 11 10 9 8 7 key 1 heating graph n°1 2 heating graph n°2 3 heating graph n°3...
Page 44
Installer_manual_oem_vaillant_proto_3_gb-06/11-vaillant - 42 - code function description setting factory setting modifiable parameter min max 123 notused 124 notused 125 notused 126 configurations exteriorsensor choosethetypeofexterior-temperaturesensor: 1=remotesensor(connectedontoterminalblock23an...
Page 45
Installer_manual_oem_vaillant_proto_3_gb-06/11-vaillant - 43 - code function description setting factory setting modifiable parameter min max 146 configurationfor stoppingtheheat pumpifcontrolbys1 contactinput 1=immediatehalt(assoonascontacts1movesintotheopenposition,theheat pumpstops). 2=gradualhal...
Page 46
Installer_manual_oem_vaillant_proto_3_gb-06/11-vaillant - 44 - 15.3 configuration of the booster heating 15.3.1 functioning of the circulators and the booster heating exterior temperature t0 (code 148) t1 (code 150) t° t0 t° > t1 heat pump off booster heating: element boiler seecode154in thetableint...
Page 47
Installer_manual_oem_vaillant_proto_3_gb-06/11-vaillant - 45 - determination of the bivalence point a b 0 2 -20 -15 -10 -5 0 5 10 15 20 4 6 8 10 12 14 16 t1 6 t0 1 4 3 5 2 legend 1 calorific power determined for the regional reference temperature 2 bivalence point 3 power graph for the heat pump 4 l...
Page 48
Installer_manual_oem_vaillant_proto_3_gb-06/11-vaillant - 46 - maintenance i any work carried out on the refrigerant circuit must be conducted by qualified engineers. Thefaultsdescribedinthischapterrequiretheservicesofa qualifiedprofessionaland,ifnecessary,availlantgroupservice engineer. 17 trouble-...
Page 49
Installer_manual_oem_vaillant_proto_3_gb-06/11-vaillant - 47 - 18 servicing • toensureefficientandreliableoperationofyourheatpumpit isrecommendedthatregularservicingiscarriedoutbyyour serviceprovider. Vaillantltd,vaillanthouse, medwaycityestate,tridentclose,rochester, kent,me24ez training - telephon...
Page 52
Notes: [1] installers should be members of an appropriate competent persons scheme. [2] all installations in england and wales must be notified to local area building control (labc) either directly or through a competent persons scheme. A building regulations compliance certificate will then be issu...
Page 53
Notes: [1] installers should be members of an appropriate competent persons scheme. [2] all installations in england and wales must be notified to local area building control (labc) either directly or through a competent persons scheme. A building regulations compliance certificate will then be issu...
Page 56
Ins taller_manual_oem_v aillan t_pr o t o_3_gb gb 06 2 011 – s ubject t o engineering change s.