Valet SmartCentre Installation Manual - Valet Smartcentre
Valet SmartCentre
Video Intercom System
1 Date and Time Set Up
The curser fl ashes at the fi rst character of Day, press “ ” (BUTTON 5) to change value, press
BUTTON 6 to move to the next value until both day/mth/yr and 24 hour clock is set.
Pressing BUTTON 6 will continue your progress through system settings until Intercom/Main menu.
Use BUTTON 5 to select Main or Sub.
At this point , hold BUTTON 6 for 3 secs, screen will then display the current setting mode of the photo
image function, keep pressing this button to enable or disable the photo function ( only operates if
Image memory option is fi tted.
Press “On/Off” button 2 to “SAVE” system settings. Self turn off after 5 seconds.
The system settings will be recorded to memory when power is off.
2 Adjusting Chime Duration
The chime duration is preset at 30 seconds. If you wish to adjust this time:
The curser fl ashes at the fi rst character of Day, keep pressing BUTTON 6 to move to the chime
duration setting.
Then press “ ” to adjust the chime time. The chime duration setting is from 10 – 90 seconds.
3 Adjusting Chime Volume
In standby mode, press “answer” BUTTON 3 for 2 seconds, the blue screen will show the defaulted
chime mode. Then press “ ”to adjust the chime volume to high, low or mute. E.g. fi gure below:
4 Adjusting Talk Volume
In standby mode, press “answer” BUTTON 3 for 2 seconds, the blue screen will display the current
talk volume. Keep pressing this button to adjust the talk volume. E.g fi g. below:
In this mode, with the current setting fl ashing, press BUTTON 6 to move adjustment from chime to the
talk setting. The defaulted talk volume is ”HIGH”. Press “ “ to adjust. If talk volume “LOW’ is
selected, a green light is displayed. Press BUTTON 2 to save and turn off the screen, or it will turn
off automatically after 5 seconds without pressing any buttons.
When the mute function is on, a red LED will light up on the monitor and the screen displays the word
“mute”. If you are called by other
monitors or your visitors press
“call” button or Doorbell/Camera,
this monitor will remain mute.
However, the broadcasting
function still works when the
mute function activated. Press “hang up” BUTTON 2 to turn off the screen, or it will be turned off
automatically after 5 seconds without pressing any button.
CHIME VOL LOW
TALK VOL LOW
CHIME VOL MUTE
TALK VOL LOW
CHIME VOL HIGH
TALK VOL LOW
CHIME VOL HIGH
TALK VOL LOW
CHIME VOL HIGH
TALK VOL LOW
17