1. DL manuals
  2. Valor
  3. Electric Heater
  4. 805 alsace
  5. Installer And Owner Manual

Valor 805 alsace Installer And Owner Manual

Other manuals for 805 alsace: Installation And Operating Manual

Summary of 805 alsace

  • Page 1

    5109955/01 installer and owner guide this guide is intended to help you install and care for your valor electric heater. Please read carefully before installing and using your heater. However, if further information is required, our valor technical helpline will be pleased to help. Telephone 08706 0...

  • Page 2

    Safety first. Valor fires are ce approved and designed to meet the appropriate british standards and safety marks. Quality and excellence. At the heart of every valor fire. All valor fires are manufactured to the highest standards of quality and excellence and are manufactured under a bs en iso 9001...

  • Page 3: Customer Care

    S customer care thank you for choosing valor all valor heaters are designed to meet the most stringent quality, performance and safety requirements to provide our customers with many years of trouble free service. This guide aims to improve your understanding and appreciation of your new valor heate...

  • Page 4: Installation

    Always always install the heater in accordance with the instructions. If in doubt obtain expert advice. Always make sure the electrical socket is accessible and located adjacent to,but not above the heater. Always disconnect the heater from the electrical supply before carrying out cleaning, mainten...

  • Page 5: Installation

    Spacers and wall kits: the heater is of a slim design and should suit most fireplace openings and fire surrounds, however there may be some applications that require the need for either a spacer or flat wall kit. These optional kits are obtainable either from the your heater supplier or direct from ...

  • Page 6

    See figure 1. Both models carefully remove the front surround by removing the two trim fixing screws and lifting upwards and forward - see figure 2. Keep the lower front, front surround and screws in a safe place when installing the fire. Offer the heater body to the fireplace opening to ensure that...

  • Page 7

    Instructions). Method d - with optional 75mm wall spacer kit the wall kit should be securely fixed to the wall using the screws provided. The heater must then be fixed to the wall kit (see kit instruction). If fixing through marble, ensure that both rawlplug and screw pass freely through the marble....

  • Page 8

    The switches are mechanically interlocked, so when switch 1 is turned off, all switches turn off. Maintaining your fire lamp replacement the lamps fitted to this heater are long life types, but due to the indeterminate life span and ease of replacement are specifically excluded from the guarantee. T...

  • Page 9

    The mains cable and the mains cable cut from the heater. Useful telephone numbers to help us quickly help you, please try to have the following information available before you contact us: your post code type of fire model / name serial number the fault, problem or request general advice about gas a...