Valor ITS-702W Owner's Manual - page 13
Power On / Off
Press the POWER OFF /VOL button to turn the unit on. The buttons
on the front of the unit are lightened and “WELCOME” message
appears briefly on the LCD screen, and then displays the current
mode status. You can also turn on the unit by pressing the POWER
button (
) on the remote control.
Press and hold the POWER OFF /VOL button on the front panel for
more than 1 second or press the POWER button (
) on the remote to power off the unit. The
monitor is drawn back into the main compartment and the LCD screen displays “BYE BYE”.
NOTE: The operating voltage range is 10.5v~16v. The unit will power off automatically to protect
Itself, when the voltage is out of this range.
Playing Source Selection
Press the SRC button on the front panel or the (SRC) button on the remote to select among the
available playing sources: TUNER, Disc, iPod,, AUX IN, CAMERA (rear view video camera),
. The selected playing mode is displayed on the TFT or LCD screen.
AUX IN Mode
An external peripheral device can be connected to this unit via RCA cables to the “AUX-IN”.
CAMERA Mode
“CAMERA” mode is only available when the camera is connected and when backing up. To
install a rear view video camera, connect the CAMERA video input cable to the rear view camera
Output cable.
NOTE: If you have not connected a device to the unit, the source can not be selected. Example:
If you have not connected an iPod to the unit, the iPod source will not be available.
Volume Adjustment
To increase or decrease the volume level, turn the POWER OFF /VOL on the front panel or press
the (VOL+/ VOL-) buttons on the remote control. The volume ranges
from “0” to “40”. The default
volume is “10” when the unit is powered
on each time. Default volume memory setup: Rotate Smart Dial/VOL
knob on the front panel to select volume value and then press and hold
the Menu button until you hear a single beep. When you hear the beep,
Setup is completed.
Audio Control Menu
The Audio Control feature allows you to easily adjust your audio system to meet the acoustical
characteristics of your vehicle, which vary depending on the type of vehicle and its
measurements. To get the best possible sound quality from your new system, be sure to adjust
the settings for the speakers as well. Proper setting of the Fader and Balance enhances the
effects of the cabin equalizer.
Accessing the Audio Control Menu
Press the POWER OFF /VOL on the front panel once or press the (SEL) button on the remote
control to enter the “Audio” menu.
Selecting an Audio Feature for Adjustment
Press the (
) buttons on the remote or press the POWER OFF/VOL button on the front
panel once to select an audio feature to be adjusted.
OPERATION INSTRUCTIONS
10
9.
: Touch to display previous folder
10.
: Touch to display next folder
11.
: Touch to fast forward current track
12.
: Touch to activate/deactivate Repeat Single Mode
13.
: Touch to activate/deactivate Random Mode
14.
: Touch to display the numeric keypad on the screen, and use it to access a track
directly.
15. The disk format indicator, display the current track and total number of tracks on disk
16. Elapsed playing time
17. playback information
18. Volume indicator
Playing MP3/WMA Files
After inserting a MP3/WMA disc, files will play in the sequence of the all directory. In playing
back, you can press the numeric button on the remote control or touch a track directly to play.
Change Directory
Touch the
or
on the screen to navigate through the directories/folders.
Previous/Next Page
Touch the
or
on the screen to navigate through the pages/files.
JPEG Discs
1. Stop playback and return to the picture list
2. Rotate picture clockwise 90°
3. Rotate picture anticlockwise 90°
1
2
3
29