Valor ITS-702W Owner's Manual - page 14
Adjusting an Audio Feature
Press the (
) buttons on the remote or rotate the POWER OFF/VOL
clockwise/counterclockwise to adjust the selected feature to the desired setting.
NOTE: The Bass and Treble levels are only adjustable when EQ is set to “User” mode.
The Loudness function compensates for deficiencies in sound ranges at low levels. When the
Loud function is on, LOUD is displayed on the screen.
Exiting the Audio Control Menu
Press and hold the POWER OFF/VOL button on the front panel to exit the audio control menu, or
Press the escape arrow on the top right corner of the TFT display.
Press the (ESC) button on the remote control to exit the audio control menu.
System Reset
To correct a system halt or other unusual operation, use the tip of a pen to press the RESET
button located on the front bottom-right corner of the unit. After a system reset, the unit restores
the settings before the last power off.
Mute
The volume will be muted when the following cases occur:
• Automatic: When the “MUTE” wire is connected to a cell phone that will output a mute signal to
the “MUTE” wire.
• Manual: Press the MUTE button on the front panel or the MUTE button on the remote to mute
The volume from the unit.
NOTE: Press the MUTE button again to restore the volume.
Adjusting the volume or using any of the audio set-up features will cancel the mute function.
User
Flat
Jazz
Pop
Classical
Rock
News
Urban
Rave
Movie
Techno
BASS
TREBL
FADE
BAL
SUB
LOUD
OFF and ON
11
Playing CD Files
After inserting a CD disc, files will play in the sequence of the all directory. In playing back, you
can press the numeric button on the remote control or touch a track on the onscreen directly to
play.
Previous/Next Page
Touch the
or
on the screen to navigate through the pages/files.
Fast backward/fast forward
Touch the
or
on the screen to fast backward or fast forward play.
MP3/WMA Discs
This player allows you to playback MP3 files recorded on CDROM, CD-R, CD-RW, DVD+R/RW
and DVD-R/RW. For CD-RW discs, please make sure it is formatted using the full method and
not the quick method to prevent illegal disc operation. Use the following settings when
compressing audio data for your MP3 disc:
• Transfer Bit Rate: 320kbps
• Sampling Frequency: 48kHz
When recording MP3 up to the maximum disc capacity, disable additional writing. For recording
on an empty disc up to maximum disc capacity, use the "Disc at once" setting.
The touch keys for MP3/WMA CD/DVD playback are described below.
1. Current source indicator, touch this area to access MAIN menu.
2. Disk title
3. Track title
4. Current time
5.
: Touch to play/pause
6.
: Touch to stop disc playback
7.
: Touch to turn to the previous page
8.
: Touch to turn to the next page
1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
17
18
28