Valor ITS-702W Owner's Manual - page 21
NOTE: When properly installed, DVD video cannot be displayed on the main TFT screen unless
the parking brake is applied. If you attempt to play a DVD while the vehicle is moving, the TFT
screen displays caution information with a blue background. Rear video screens, if applicable,
will operate normally.
Opening/Closing the TFT Video Screen
Opening the TFT Screen
To open the TFT video screen, press the (
) button on the unit or press the (
) button
on the remote control.
Closing the TFT Screen
Press the (
) button on the unit or press the (
) button on the remote control again to
close the TFT screen.
Insert/Eject Disc
Inserting a Disc
When inserting a DVD disc, DVD mode is entered and disc play begins.
NOTE: If Parental Lock (Rating) is activated and the disc inserted is not authorized, the 4-digit
code must be entered and/or the disc must be authorized (see “RATING (Parental Lock) Menu”).
You cannot insert a disc if there is already a disc in the unit or if the power is off.
NOTE: CD-R/RW, DVD-R/RW, DVD+R/RWs will not play unless the recording session is closed.
Ejecting a Disc
Press the button
on the unit to eject the disc. The unit automatically reverts to Tuner mode
at the same time.
Reset the Loading Mechanism
If the disc loads abnormally or does not play properly, press and hold the button
on the
unit to reset the loading mechanism. The disc is ejected and normal operation resumes.
Accessing DVD Mode
To switch to DVD mode when a disc is already inserted, press the SRC button on the front panel
or on the remote control till DVD appears at the top of the screen.
Using the Touch-Screen Controls
DVD PLAYER OPERATION
1
2
3
4
5
6
7
8
9
18
5. Press the OK button on the remote control or on the touch screen to go to the specified
location on the disc.
6. Press the GOTO button on the remote control or touch the F Area on the screen again to exit.
Direct Chapter / Track Selection
During DVD, VCD and CD playback, you can use the numeric keypad on the remote control to
access a track directly.
Viewing an Alternate Picture Angle (DVD Only)
Some DVDs contain scenes that have been shot simultaneously from different angles. For discs
recorded with multiple angles, press the (ANGLE) button on the remote control to toggle
available angles of the on-screen image.
Zooming
Press the ZOOM button on the remote control to enlarge and pan through the video image using
the following options: “Q1”, “Q2”, “Q3”, and “OFF”.
Multi-Language Discs (DVD Only)
Changing Audio Language
If you are watching a disc recorded in multiple languages, press the (AUDIO) button on the
remote control to choose a language. You also can touch the area E, and then touch the
button.
NOTE: During VCD playback, press the (AUDIO) button on the remote control to choose
between Left Channel, Right Channel, and Stereo.
Changing Subtitle Language
If you are watching a disc recorded in multiple languages with subtitles, press the (SUBT) button
on the remote control to choose the language in which you would like the subtitles to appear.
You also can touch the area E, and then touch the
button.
Playback Information
During DVD and VCD playback, press the (INFO) button on the remote control or touch the area
B to display playback information on the screen, including the media playing and current
playback time.
DVD Playback Information
The following information is displayed at the top of the screen during DVD playback:
21