Value Hobby Sbach-342 EPP 3D Profile Instruction Manual - page 8
Other manuals for Sbach-342 EPP 3D Profile:
Instruction Manual
of
12
www.valuehobby.com/5mm-epp.html
8
Section3. Carbon Rods Installation
Glue NO1. to NO 11 carbon fiber rods to the
fuselage and wing as shown.
(The slots for CF rods were pre-cut in the factory.)
Section4. Tail Skid Installation
Glue one piece of NO.15 carbon fiber strip to the
fuselage as the tail skid.
Section5. Servo Installation
Step1. Prepare three servo arm assembly with
pushrod connector
Step2. Use the hot glue to install the 9g micro
servo to the fuselage.