Value Hobby Sbach-342 EPP 3D Profile Instruction Manual - page 9
Other manuals for Sbach-342 EPP 3D Profile:
Instruction Manual
of
12
www.valuehobby.com/5mm-epp.html
9
Step3. Install the aileron servo arm. (Center the
servo electronically in advance.)
Step4. Install two 5g servos to the fuselage.
(Elevator and rudder servo)
Step5. Use the heat shrink tube to connect the
NO.12 carbon fiber rod and the steel wire with z
bend as the pushrod wire.
Step6. Install the control horn to the z bend
Place the wood control horn in position to make
the pushrod wire is 90 degrees aligned with the
hinge line and the holes on the control horn is
aligned with the hinge line.