Vari Lite VL2000 User Manual - Www.Carlosmendoza.Com.Mx
VARI
❋
LITE® - VL2000™ S
POT
L
UMINAIRE
U
SER
’
S
M
ANUAL
8 8
02-M ay- 03
0 2 . 9 6 7 3 . 0 0 0 1 D
CAUTION: Do not touch gobos with bare fingers. Wear cotton gloves or other covering while
replacing. Clean with glass cleaner and soft cloth if required.
Note: In some cases it is easier to slide bulkhead partially out of head assembly to access gobos. To do
this, use #2 Phillips screwdriver to turn captive screw one-quarter turn and slide bulkhead upward.
Disconnect motor connections as necessary.
Step
3. Rotate wheel until required gobo is accessible at finger access cutout.
Figure A-6: Gobo Access
CAUTION: Do not touch gobos with bare fingers. Wear cotton gloves or other covering while
replacing. Clean with glass cleaner and soft cloth if required.
Step
4. Using fingers, pull gobo out of wheel.
Step
5. Noting proper orientation of carrier slot and
orienting “black” side of gobo toward front lens,
insert new gobo into position and push fully into
place.
Step
6. Re-install bulkhead (if applicable) and re-install
removable cover.
Figure A-7: Fixed Gobo Removal
Finger Access
Cutout
Gobo
Gobo Wheel
Gobo
Carrier Slot