Vari Lite VL2000 User Manual - Www.Carlosmendoza.Com.Mx
VARI
❋
LITE® - VL2000™ S
POT
L
UMINAIRE
U
SER
’
S
M
ANUAL
9 0
02-M ay- 03
0 2 . 9 6 7 3 . 0 0 0 1 D
Step
3. At rotating gobo wheel, rotate until required gobo/filter is accessible.
Step
4. Locate end of coiled spring which is fitted under carrier tab. Using hook and pick tool or
small slotted screwdriver, push end of spring from under tab until it is free. Once free,
remove entire coiled spring.
Figure A-9: Rotating Gobo Removal
CAUTION: Do not touch gobos with bare fingers. Wear cotton gloves or other covering while
replacing. Clean with glass cleaner and soft cloth if required.
Step
5. Remove gobo.
Step
6. Aligning flat side correctly and orienting “black” side of gobo toward front lens, install new
gobo.
Step
7. Re-install spring, ensuring it is fully secured under carrier tabs.
Step
8. Re-install removable cover.
Spring
Gobo
Carrier
Tab
Free end of spring
and then remove
Flat side
Orient flat side to
flat side of carrier
Flat Locator
Markers
Spring