Vax Mach3 U90-M3 series Instruction Manual - page 7
7
dirt container and filters
5. Dirt container & filters:
removal & replacement
NOTE: Familiarise yourself with these home
maintenance tasks as proper use and care of your
cleaner will ensure continued cleaning effectiveness.
Emptying the Dirt Container
Empty the dirt container before the dirt reaches the fill
line (A) (Fig.5/1).
CAUTION: Very fine materials, such as face
powder or flour, may seal the filter and cause a
reduction in performance.
When using the cleaner for this type of dust, empty the
dirt container and clean the filters often.
How to Empty
IMPORTANT: Disconnect cleaner from electrical
outlet. Do not use the cleaner without dirt
container or filters in place.
Press dirt container release button and pivot out (Fig.5/2).
Holding the dirt container over a bin, press the release
button (A) to open dirt container flap (Fig.5/3).
Press dirt container door release button to latch dirt
container door closed.
Place bottom of dirt container in first. Pivot dirt container
into cleaner body (Fig.5/4).
Press on dirt container release button while firmly
pressing on dirt container. Release button in order for it
to return to proper position and lock the dirt container
into place (Fig.5/5).
Cleaning Filters
Cleaning the Cyclonic Filter Assembly
IMPORTANT: Disconnect cleaner from electrical
outlet. Do not use cleaner without dirt
container or filters in place.
Fig.5/3
Fig.5/4
Fig.5/5
Fig.5/1
Fig.5/2
A
A
!
!
!
Vax Careline: (UK) 0844 412 8455 (ROI) 1-800 928 308
U90-M3 & M4 Series User Guide v1.4.qxd:UG
15/7/10 15:37 Page 7