VDG FH1500-WR Owner's Manual - Care And Maintenance
10
CARE AND MAINTENANCE
Maintenance
Risk of electric shock! DO NOT OPEN! No user-serviceable parts inside!
ALWAYS turn the heater OFF and unplug the power cord from the outlet before
cleaning, performing maintenance, or moving this heater. Failure to do so could result in
electric shock, fire, or personal injury.
Electrical and Moving Parts:
•
The fan motor is lubricated at the factory and will not require lubrication.
•
Electrical components are integrated in the heater and are not serviceable by the consumer.
Storage:
•
Store heater in a clean dry place when not in use.
Cleaning
ALWAYS turn the heater OFF and unplug the power cord from the outlet before
cleaning, performing maintenance, or moving this heater. Failure to do so could result in
electric shock, fire, or personal injury.
NEVER immerse in water or spray with water. Doing so could result in electric
shock, fire, or personal injury.
Metal:
•
Buff using a soft cloth, slightly dampened with a citrus oil-based product.
•
DO NOT use brass polish or household cleaners as these products will damage the metal trim.
Control Panel:
•
NEVER spray cleaner directly onto the control panel. Spray a small amount onto a cloth, then
wipe gently.
•
NEVER use abrasive cleansers, liquid sprays, or any cleaner that could scratch the surface.
Vents:
•
Use a vacuum or duster to remove dust and dirt from the heater and vent areas.
•
Clean the exterior of the heater with a slightly damp cloth or duster.
Wood:
•
NEVER use abrasive cleansers, liquid sprays, or any cleaner that could scratch the surface.
•
Clean the exterior of the heater with a slightly damp cloth or duster.