Vega VEGADIS 176 Operating Instructions Manual - page 16
16
6 Setup
VEGADIS 176 • External indicating and adjustment display without external energy for front panel mounting
47916-EN-170801
Example: SC__20 = 100.0 means display 100.0 with measurement
current 20 mA. The unit selected under UNIT is used in the display.
Value range: -19 999 … 99 999
In this menu item you select the unit for the display. By setting
"USER",auser-definedunitcanbeenteredinparameter"TEXT".
Value range: %, °C, °F, K, USER
By setting "USER" in "UNIT",auser-definedunitcanbeentered.
Value range: Free text, 5 characters
6.3 Parameter adjustment - Menu Diagnosis
Inthismenuitem,actuallyoccurringdiagnosticmessages(Actual
Error)aredisplayed.Ifseveralmessagesoccuratthesametime,the
message with the highest priority is displayed.
Inthismenuitem,thelastdiagnosticmessage(LastError)withthe
highest priority is displayed.
Inthismenuitem,thefirmwareversionisdisplayed.
6.4 Parameter adjustment - Menu Expert
The menu Expert also contains, in addition to all menu items from the
menu Setup, the submenus and menu items described here. When
theExpertmenuisinvoked,theusercodeisrequested(UCODE,
Default:0000).
Instrumentsetupcanbeprotectedagainstunauthorizedmodification
by means of the user code. If setup is locked, the lock symbol is dis-
played when an adjustment parameter is invoked. With default setting
"0000", the user code is not active, i.e. parameters in the setup can
bemodifiedwithoutenteringthecode.TogainaccesstotheExpert
menu, the code always has to be entered, even when the default set-
tings are active.
Value range: 0000 … 9999
Resetting the instrument setup to default values.
Byselecting"YES"andconfirmingwiththe"OK" key, the instrument
is reset.
Value range: YES, NO
The following table shows the default values after a reset:
Setup - UNIT
Setup - TEXT
Diagnosis - AERR
Diagnosis - LERR
Diagnosis - FWVER
SYSTM - UCODE
SYSTM - FRSET