Vega VEGAPULS 67 Operating Instructions Manual - page 12
T
he optional heating requires its own power supply. You can
fi
nd detailed information in the supplementary instructions
manual "Heating for indicating and adjustment module". This
function is generally not available for approved instruments.
3.3 Operation
VEGAPULS
67
can be adjusted with different adjustment
media:
l
with indicating and adjustment module
l
with the suitable VEGA DTM in conjunction with an
adjustment software according to the FDT/DTM standard,
e.g. PACTware™ and PC
l
with manufacturer-specific adjustment programs AMS™ or
PDM
l
W
ith a HART handheld
T
he entered parameters are generally saved in VEGAPULS
67,
optionally also in the indicating and adjustment module or
in PACTware™.
3.4 Packaging, transport and storage
Y
our instrument was protected by packaging during transport.
I
ts capacity to handle normal loads during transport is assured
by a test according to DIN EN 24180.
T
he packaging of standard instruments consists of environ-
ment-friendly, recyclable cardboard. For special versions, PE
foam or PE foil is also used. Dispose of the packaging material
via specialised recycling companies.
T
ransport must be carried out under consideration of the notes
on the transport packaging. Nonobservance of these instruc-
tions can cause damage to the device.
T
he delivery must be checked for completeness and possible
transit damage immediately at receipt. Ascertained transit
damage or concealed defects must be appropriately dealt
with.
U
p to the time of installation, the packages must be left closed
and stored according to the orientation and storage markings
on the outside.
U
nless otherwise indicated, the packages must be stored only
under the following conditions:
Packaging
Transport
Transport inspection
Storage
12
VEGAPULS
67 • 4 … 20
mA/HART
P
roduct description
32938
-EN
-080610