Vegas LedSync820C User Manual

Manual is about: LED Video Processor

Summary of LedSync820C

  • Page 1

    Ledsync820c led video processor user’s manual.

  • Page 2: Led Video Processor

    Ledsync820c user’s manual --------------------------------------------------------------------------------------------------- led video processor 2 table of contents i. Safety precautions ----------------------------------------------------------------- 3 ii. Connections of hardware 1.Rear view ----...

  • Page 3: Led Video Processor

    Ledsync820c user’s manual --------------------------------------------------------------------------------------------------- led video processor 3 i. Safety precautions danger! There is high voltage in the processor, to prevent any unexpected hazard, unless you are a maintenance, please do not open...

  • Page 4: Led Video Processor

    Ledsync820c user’s manual --------------------------------------------------------------------------------------------------- led video processor 4 ii. Connections of hardware 1. Rear view figure 1 2. Port description 1) video input (input column) ledsync820c supports 8-channel signal input, includi...

  • Page 5: Led Video Processor

    Ledsync820c user’s manual --------------------------------------------------------------------------------------------------- led video processor 5 5) signals of other ports port name description rs232 in serial communication port, ledsync820c’s timing control software running on upper controller ca...

  • Page 6: Led Video Processor

    Ledsync820c user’s manual --------------------------------------------------------------------------------------------------- led video processor 6 iii. Frontal panel operations 1. Diagram of frontal panel figure 3 2、 button operations: ledsync820c have 14 buttons on frontal panel, after start-up al...

  • Page 7: Led Video Processor

    Ledsync820c user’s manual --------------------------------------------------------------------------------------------------- led video processor 7 2) select output brightness button names description brt - decrease output image brightness of ledsync820c brt + increase output image brightness of led...

  • Page 8: Led Video Processor

    Ledsync820c user’s manual --------------------------------------------------------------------------------------------------- led video processor 8 iv. Setup of output image the following setps must be made by relevant qualified technicians. For ordinary users, unless they have received adequate rel...

  • Page 9: Led Video Processor

    Ledsync820c user’s manual --------------------------------------------------------------------------------------------------- led video processor 9 2. Setup of ledsync820c output image ledsync820c can setup its output image by operating the buttons on frontal panel. After ledsync820c is started up, ...

  • Page 10: Led Video Processor

    Ledsync820c user’s manual --------------------------------------------------------------------------------------------------- led video processor 10 c) generally, the start coordinates of output image (hor_str , vert_str ) should be identical to the start coordinates of the input image that led tran...

  • Page 11: Led Video Processor

    Ledsync820c user’s manual --------------------------------------------------------------------------------------------------- led video processor 11 v. Troubleshooting 1、 dark screen, no image on led check the input source of ledsync820c for any abnormality. If the indicator above input signal butto...

  • Page 12: Led Video Processor

    Ledsync820c user’s manual --------------------------------------------------------------------------------------------------- led video processor 12 set the output resolution any of the following 800×600 1024×768 1280×1024 note that dvi output refresh frequency (vertical scanning frequency) must be:...

  • Page 13: Led Video Processor

    Ledsync820c user’s manual --------------------------------------------------------------------------------------------------- led video processor 13 2、 timing control software can’t control ledsync820c 1) make sure rs232 cable supplied with the machine is properly connected, one end connects com por...

  • Page 14: Led Video Processor

    Ledsync820c user’s manual --------------------------------------------------------------------------------------------------- led video processor 14 vi. Specifications inputs nums/type 1×rgbhv(vga) 1×dvi 1×ypbpr(hdtv) 4×cvbs 1×y/c(s-video) video system pal/ntsc cvbs scope/impedance 1v (p_p) / 75Ω y/...