Vegas LedSync820C User Manual - Led Video Processor
LedSync820C User’s Manual
---------------------------------------------------------------------------------------------------
LED VIDEO PROCESSOR
12
Set the output resolution any of the following
800×600
1024×768
1280×1024
Note that DVI output refresh frequency (Vertical Scanning
Frequency) must be: 60Hz
If DVI indicator of LedSync820C frontal panel still blinks,
please have supplier repair it.
If current input source is: VGA
First, check VGA connection cable
Actuate VGA output of PC graphic display card
Set the output definition any of the following
800×600
1024×768
1280×1024
Note that VGA output refresh frequency (Vertical Scanning
Frequency) must be: 60Hz
If VGA indicator of LedSync820C frontal panel still blinks,
please have supplier repair it.
If current input source is: YPbPr
First, check YPbPr cable, the three cables Y, Pb, Pr are
connected to corresponding input jacks of LedSync820C
respectively.
Make sure YPbPr signal is in any of the following formats:
720p@60Hz
1080i@60Hz
If the YPbPr indicator on frontal panel of LedSync820C
still blinks, please have supplier repair it.
If current input source is: Y/C(S_Video)
Check S_Video cable.
Make sure S_Video output of DVD player has been
actuated (some DVD players might have disabled S_Video
output, it must be reset and actuated).
If Y/C indicator on frontal panel of LedSync820C still blinks,
please have supplier repair it