Vegas LedSync820C User Manual - Led Video Processor
LedSync820C User’s Manual
---------------------------------------------------------------------------------------------------
LED VIDEO PROCESSOR
7
2) Select output brightness
Button names
Description
BRT -
Decrease output image brightness of
LedSync820C
BRT +
Increase output image brightness of
LedSync820C
LedSync820C supports 8 levels Brightness, “1” represents the
lowest brightness, 8 represents the highest brightness. When
brightness is adjusted to be “1”, ”3”, ”5” or “7”, their LED indicators
will blink; When brightness is adjusted to be “1”, ”3”, ”5” or “7”, their
LED indicators will keep illumed.
3) Select image status
Button names
Description
DEF
Select user-defined image parameters, including
GAMMA value, Video Chrom and Hue. User can
define custom parameters using PC software.
STD
Select a standard image status to output image.
This standard image has been preset at factory,
including GAMMA =1, Video Chrom and Video
Hue = standard values. User can’t modify these
standard values.
4) Select FULL/PART display (FULL, PART)
Button names
Description
FULL
FULL means that LED will display a full picture.
PART
PART means that LED only display a part of a
picture.
3、 Software Control:
LedSync820C is supplied with Timing Control software
, user can operate and control LedSync820C using this
software, including:
z Switch input signal source, change brightness of output
images.
z Manually operate and control it or edit operation and control
schedule to make it executed automatically.
z Carry out site control, or remote control over LAN or WAN.
For details please refer to LedSync82xx Timer.