Velleman DCM97K User manual - page 11
DCM97K v2 GB
10
2.2. Bottom View
Consult fig. 4 and follow the procedure outlined below to familiarise yourself with
the device.
Output plugs
Output
terminals
ó
Adjusting hole
To be used exclusively by
service personnel.
3. SPECIFICATIONS
Max. accuracy is achieved during a one-year period after calibration, at a
temperature of 18°C to 28°C (64°F to 82°F) and a max. relative humidity of 80%.
Accuracy specifications are rendered as follows :
±
% of reading
±
digits
3.1. General
Current Range
: 0.1A to 300A AC rms
Output Voltage
: 1mVAC per 0.1A AC
Working Voltage
: 600V CAT II in accordance with IEC1010-1
Maximum Altitude
: 2000m
Operating Temperature
: 0 to 50°C, relative humidity max. 80%
Storage Temperature
: -20°C to 60°C
Sensor type
: induction coil capable of sensing AC
current
Temperature Coefficient
: 0.2 x (spec. accuracy)/°C, <18°C or >28°C
Maximum Output Impedance
: 45
Ω
Maximum Jaw Opening
: 31mm
Maximum Diameter of the Conductor : 29mm
Dimensions
: 81 x 106 x 31mm
Weight :
126g
FIGURE 4