VENOM P1 Instruction Manual And Tuning Manual - page 6
6
Slide the prop onto the drive shaft making sure to align the notch with the drive dog. Use the supplied lock nut to secure the
prop to the propshafts. Use caution when installing the prop as it may have extremely sharp edges.
If you are using a
aftermarket prop, make sure it is sized for a 4mm prop shaft. If you are not using a 4mm prop, you will need to shim the prop
shaft or use an adapter to increase the diameter to .187 inch.
INSTALLING THE PROPELLER
INSTALLING THE PROPELLER
Always use a charger specifically rated to charge your batteries.
Charging and discharging batteries has the potential
for serious injury to persons and damage to property. Caution: If batteries get hot during charging, discontinue charging
immediately and disconnect battery from charger. Never leave battery unattended while charging. If you are unsure of how
to charge this battery, please contact Venom™ or seek the advice of your local hobby shop. Never let children charge
batteries without adult supervision.
BOAT STAND
BOAT STAND
BATTERY INSTALLATION
BATTERY INSTALLATION
4
Thin CA Glue
2
1
1
3
2
Finished Stand